Hansa OKC 6111 MWH [114/128] Installation

114

Setting the air extractor mode of operation of

the hood

In the extractor mode air is discharged to the out-

side by a special conduit. In that setting any carbon

lters shall be removed. The hood should be con-

nected to the opening discharging air to the outside

by means of a rigid or exible conduit of

120 mm diameter, which should be purchased in a

shop selling installation materials.

A qualied installer should be commissioned to

make the connection.

Setting the odour absorber mode of operation

of the hood

In this option ltered air returns to the room

through openings in the front of the hood.

In this setting it is necessary to install the carbon

lter. It is recommended to install the air guide

(availability depending on model).

In some universal hoods you need to switch lever

inside the hood (Fig. 8) to switch between the

extraction and air recirculation modes. The cle-

aned air is returned to the room through the holes

in the top of the unit.

Furniture and telescopic cooker hoods operating

in air recirculation mode require installation of the

exhaust duct. The other end of the duct should be

directed to the room as it will discharge ltered air.

Fan speeds

The lowest and medium speeds should be used

under normal conditions and with low concentration

of fumes. The maximum speed should be used in

case of high concentration of kitchen fumes, e.g.

during frying or grilling.

INSTALLATION