Home
Главная
Krups
Кофемашины
EA8080PE Espresseria
Руководство по эксплуатации Страница: 9

Krups EA8080PE Espresseria [9/128] English

PREPARING STEAM

Steam froths up the milk to make a cappuccino or a caffe latte, for example, and also heats up liquids. As you need a higher

temperature to produce steam than to make an espresso, the appliance runs an additional pre-heating phase for steam.

While the screen displays the drink selection menu, press the “steam” key . A screen

will inform you that the appliance is being pre-heated. Once the pre-heating phase has

been completed, a message will ask you to place a recipient under the steam nozzle.

Press the “steam” key again to start generating steam. A little water will be produced

first and then steam will start. Use the same key to stop steam generation.

BE CAREFUL, BECAUSE THE CYCLE DOES NOT STOP IMMEDIATELY.

Check that the steam

nozzle is correctly fit-

ted.

Pour the milk into your

milk jug. Only half fill it.

Immerse the nozzle in the

milk.

aPress the “steam” key

and follow the

instructions on the

screen.

Once your milk is frothy

enough…,

again press the “steam”

key to stop the cycle.

Be careful, because the

cycle does not stop

immediately.

To remove any remaining

milk from the steam

nozzle, place a recipient

under the nozzle and

press the “steam” key

Let the hot water escape

for at least 10 seconds

and then again press the

“steam” key to stop

water.

To interrupt the steam function, just press any key.

If the nozzle is blocked, clean it out with a fine needle.

The maximum duration for production of steam per cycle is limited to 2 minutes.

You can remove the steam nozzle for thorough cleaning. Wash it

using a brush with water and a little non-abrasive washing up

liquid. Rinse and dry it. Before re-fitting, make certain that the air

inlet holes are not clogged by milk residues. Clean out the holes

with a needle if necessary.

FROTHING MILK

We recommend that you use pasteurised or UHT milk that has been recently opened. Untreated milk does not

give the best results. After the steam function has been used, the nozzle can be hot, and we recommend that

you wait for a few moments before handling it.

ENGLISH

SETTING UP THE AUTO-CAPPUCCINO XS 6000 (SOLD SEPARATELY)

To prevent milk from drying on the auto-cappuccino accessory, it must be cleaned thoroughly. It is recommend that you

wash it immediately by carrying out a cycle with steam and the accessory pot filled with water in order to clean the

inside of the nozzle. To do so, you can use liquid cleaner XS4000, available as an accessory.

Attach the various parts

together.

Select the cappuccino or caffe

latte position on the special nozzle.

Fill up the milk pot and place a

cup or a glass underneath the

auto-cappuccino nozzle.

Press the button to start

and then to stop the cycle

Place your cup under the

coffee outlets and start a

coffee / espresso cycle.

This auto-cappuccino accessory makes it easier to make a cappuccino or a caffe latte.

XS 6000

Krups EA8080PE Espresseria [9/128] English

Содержание

Похожие устройства