Home
Главная
Hotpoint-Ariston
Плиты
H6TMH4AF (X)
Руководство по эксплуатации Страница: 7

Hotpoint-Ariston H6TMH4AF (X) [7/44] Installation

! Before operating your new appliance please read

this instruction booklet carefully. It contains important

information concerning the safe installation and operation

of the appliance.

! Please keep these operating instructions for future

reference. Make sure that the instructions are kept with

the appliance if it is sold, given away or moved.

! The appliance must be installed by a qualified

professional according to the instructions provided.

! Any necessary adjustment or maintenance must be

performed after the cooker has been disconnected from

the electricity supply.

Room ventilation

The appliance may only be installed in permanently-

ventilated rooms, in accordance with current national

legislation. The room in which the appliance is installed

must be ventilated adequately so as to provide as much

air as is needed by the normal gas combustion process

(the flow of air must not be lower than 2 m

/h per kW of

installed power).

The air inlets, protected by grilles, should have a duct

with an inner cross section of at least 100 cm

and should

be positioned so that they are not liable to even partial

obstruction (see  gure A).

These inlets should be enlarged by 100% - with a

minimum of 200 cm

- whenever the surface of the hob

is not equipped with a flame failure safety device. When

the flow of air is provided in an indirect manner from

adjacent rooms (see  gure B), provided that these are

not communal parts of a building, areas with increased

fire hazards or bedrooms, the inlets should be fitted with

a ventilation duct leading outside as described above.

Adjacent room Room requiring ventilation

suction chimney, or using an electric fan that begins

to operate automatically every time the appliance is

switched on (see  gure).

Fumes channelled Fumes channelled through

straight outside a chimney or a branched

flue system (reserved for

cooking appliances)

Installation

A B

! After prolonged use of the appliance, it is advisable to

open a window or increase the speed of any fans used.

Disposing of combustion fumes

The disposal of combustion fumes should be guaranteed

using a hood connected to a safe and efficient natural

! The liquefied petroleum gases are heavier than air and

collect by the floor, therefore all rooms containing LPG

cylinders must have openings leading outside so that

any leaked gas can escape easily.

LPG cylinders, therefore, whether partially or completely

full, must not be installed or stored in rooms or storage

areas that are below ground level (cellars, etc.). Only

the cylinder being used should be stored in the room;

this should also be kept well away from sources of

heat (ovens, chimneys, stoves) that may cause the

temperature of the cylinder to rise above 50°C.

Positioning and levelling

! It is possible to install the appliance alongside

cupboards whose height does not exceed that of the

hob surface.

! Make sure that the wall in contact with the back of the

appliance is made from a non-flammable, heat-resistant

material (T 90°C).

To install the appliance correctly:

• Place it in the kitchen, the dining room or the bed-sit

(not in the bathroom).

• If the top of the hob is higher than the cupboards, the

appliance must be installed at least 600 mm away from

them.

• If the cooker is installed underneath a wall cabinet,

there must be a minimum distance of 420 mm

between this cabinet and the top of the hob.

This distance should be increased to 700 mm if the

wall cabinets are flammable (see  gure).

• Do not position blinds behind the cooker or less than

200 mm away from its sides.

Ventilation opening for

comburent air

Increase in the gap between the

door and the flooring

Hotpoint-Ariston H6TMH4AF (X) [7/44] Installation

Содержание

Похожие устройства