Vitek VT-1978 W [5/48] English

Vitek VT-1978 W [5/48] English
5
ENGLISH
Access to memory cells
- Switch on the unit by slight knock at the case.
- If “0.0 kg” or “0.0 lb” are displayed, stand on
the scales barefoot, your feet and heels should
be fitted into the circles. Wait until your weight
is displayed.
- Keep staying on the scales. When the “0000
symbols are displayed and begin to disappear
gradually, the percentage of fat and water,
muscles and bone mass in body tissues is be-
ing measured.
- After measurements the following data will
be displayed: - percentage of fat “fat”, water
TBW, muscles “MUS”, bone mass “BONE”,
as well as daily demand in kilocalorie “KCAL”.
The results will be repeated three times in this
sequence.
- Estimation of the results is reflected by color
indication; – red arrow means excess weight,
yellow sector – normal weight, green arrow
– underweight.
- Then weight indications and percentage of fat
are recorded into the memory cell of the user,
which is displayed by gradually decreasing
0000”, “. 000 - …0”.
- At gradually decreasing of “0000”, “. 000 -
…0”, you can refer to the necessary memory
cell.
- Use “/” to select user “P0, P1…P9”, and
press “ENTER” to confirm.
- After it the results of the previous measuring
will be displayed (weight and fat percentage),
color indicators (red arrow means excess
weight, yellow sector – normal weight, green
arrow – underweight) will not light up.
- Then gradually decreasing “0000”, “. 000 -
…0” will appear on the display, and the scales
will switch off.
Note:
- Access to memory cells is possible only at the
moment of recording of current measuring in-
dications at gradually decreasing “0000”, “.
000 - …0” on the display.
- If in one of the memory cells (for instance,
“P5”) there are no data about weight and fat
percentage, it is impossible to recall indica-
tions from the cell (for instance “P6”).
- If the unit operates unstable, check the batter-
ies and replace them if necessary.
MAINTENANCE
Take care using the scales. This is the preci-
sion tool, avoid temperature differences, high
humidity, strikes, dust and direct sun rays.
• Keep away from heaters.
• Do not jump on the scales.
• Wipe the platform with damp cloth.
Do not use chemicals and abrasive agents to
clean the scales.
Do not let liquids inside the housing of the
scales.
Do not use or keep the scales in humid (more
then 80%) cabinets, do not let it to contact
with water or other liquids, as such a contacts
could affect the measurement accuracy or
lead to scale malfunction.
• If you do not use the appliance for a long time,
open the battery compartment lid and remove
the batteries.
Keep the appliance in a dry place out of the
reach of children.
SPECIFICATIONS
Max.weight: 180 kg
Min.weight: 2 kg
Divisions: 0,1 kg
Battery: 2 batteries 3V CR 2032
Specifications subject to change without prior
notice.
Service life of appliance - 5 years
GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and
to the Law Voltage Regulation (73/23
EEC)
1978.indd 51978.indd 5 28.01.2010 15:05:0328.01.2010 15:05:03

Содержание

Скачать