Oleo-Mac BC 24 T Инструкция по эксплуатации онлайн [36/246] 91721

• The cord wears quicker and must be fed

forward more often when working against

stones, brick, concrete, metal fences, etc., than

when coming into contact with trees and

wooden fences.

• When trimming and clearing you should use

less than full throttle so that the cord lasts

longer and to reduce the wear on the trimmer

head.

Cutting

• The trimmer is ideal for cutting grass that is

difficult to reach using a normal lawn mower.

Keep the cord parallel to the ground when

cutting. Avoid pressing the trimmer head

against the ground as this can ruin the lawn

and damage the tool. (Fig. 15)

• Do not allow the trimmer head to constantly

come into contact with the ground during

normal cutting. Constant contact of this type

can cause damage and wear to the trimmer

head.

Sweeping

• The fan effect of the rotating cord can be used

for quick and easy clearing up. Hold the cord

parallel to and above the area to be swept and

move the tool to and fro (Fig. 16).

• When cutting and sweeping you should use

full throttle to obtain the best results.

WARNING: Never cut, when visibility is

poor or in very high or low temperatures or in

freezing weather.

8. TRANSPORTING

TRANSPORTION

Carry the brush cutter with the engine o and with

the protective blade cover on (Fig. 3).

ATTENTION: Fit the disk protection p.n.

4196086 as shown (Fig. 3) before transporting or

storing the brushcutter.