Centek CT-0038 [17/24] After the water is boiled the buzzer will emit a sound of di and automatically
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Centek CT-0038 [17/24] After the water is boiled the buzzer will emit a sound of di and automatically

Centek CT-0038 [17/24] After the water is boiled the buzzer will emit a sound of di and automatically
17
- The appliance is not designed to be powered from an external timer or other separate
remote control system.
2. APPLIANCE DESCRIPTION
1. Lid
2. Housing
3. Power base with power cord compartment
4. Lid release button
5. Touch control panel
6. Temperature display
7. White tea coking mode button
8. Green tea coking mode button
9. Oolong tea coking mode button
10. Boiling function button
11. Temperature increase/decrease buttons
12. Warming function button
13. ON/OFF button
3. SCOPE OF SUPPLY
- Electric kettle – 1 pc.
- Kettle base – 1 pc.
- Operating Manual – 1 pc.
4. OPERATING PROCEDURE
• Retain all packaging materials until you make sure that the kettle operates properly.
• Ensure that the power supply grid voltage corresponds to the one indicated on the
kettle’s base before operating it.
• Do not operate the unit with damaged power cable or plug.
• Before the first use boil and discard water two times. It is recommended to add
some citric acid to the water for the first boiling. The kettle is designed for boiling
pure water only.
• Place the kettle on a smooth level surface. Do not place the kettle at the edge of a
table.
• Connect the kettle to an electric socket. Excessive power cord can be wrapped
around the guides inside the base and draw its end through the cutout in its side.
• Do not let the power cord hang from a table where a child can pull on it.
• Do not place the kettle near heating appliances and hot surfaces.
KETTLE OPERATION
-
Place the base on a dry, smooth horizontal plane, plug into the power supply,
when the kettle is put into the base, the power supply and power switch will be
automatically connected, enter the setting mode (the setting lights are all on), the
buzzer will emit a «di» sound, and the display screen will display the current real
temperature. (If there is no operation within 1 minute, the kettle will automatically
enter the standby state, and the power button light will be converted into a breathing
light)
-
Press the «КИПЯЧЕНИЕ» key, and the buzzer will emit a sound of «Di», on the screen
display the corresponding setting temperature 100 ⁰С, three set buttons «КИПЯЧЕ-
НИЕ», «ПОДОГРЕВ», all lights are on, the current temperature is displayed on
the display screen, and water is boiled at the same time.
-
After the water is boiled, the buzzer will emit a sound of «Di» and automatically
enter the keep warm state. The keep warm time will be 2 hours. When the water
temperature is lower than the set temperature of about 5 degree, the heating will
be resumed until 2 hours.
CUSTOM OPERATIONS
TEA PREPARATION MODES
-
In the setting interface, press the «БЕЛЫЙ» key, and the buzzer will emit a sound of
«Di». The screen displays the corresponding setting temperature of 70 °C, three key
«БЕЛЫЙ», «ПОДОГРЕВ», . Lights are on the current temperature is displayed on the
display screen. When the water temperature reaches 70 ⁰С, the kettle automatically
enters the keep warm state. When the water temperature is about 5 degrees below
the set temperature, the heating will be resumed until 2 hours.
-
In the setting interface, press the «ЗЕЛЕНЫЙ» key, and the buzzer will emit a sound
of «Di». The screen displays the corresponding setting temperature of 80 °C, three
key «ЗЕЛЕНЫЙ», «ПОДОГРЕВ», . All lights are on the current temperature is
displayed on the display screen, When the water temperature reaches 80 ⁰С, the
kettle automatically enters the keep warm state. When the water temperature is
about 5 degrees below the set temperature, the heating will be resumed until 2 hours.
-
In the setting interface, press the «УЛУН» key, and the buzzer will emit a sound of
«Di». The screen displays the corresponding setting temperature of 90 °C, three key
«УЛУН», «ПОДОГРЕВ», lights are on the current temperature is displayed on the
display screen, When the water temperature reaches 90 ⁰С, the kettle automatically
enters the keep warm state. When the water temperature is about 5 degrees below
the set temperature, the heating will be resumed until 2 hours.
-
In the setting interface, press the «+» key, and the buzzer will emit a sound of «Di».
The screen displays the corresponding setting temperature of 40 °C, Four key «+»,
«-», «ПОДОГРЕВ», . All lights are on the current temperature is displayed on the
display screen, When the water temperature reaches 40 ⁰С, the kettle automatically
enters the keep warm state. When the water temperature is about 5 degrees below
the set temperature, the heating will be resumed until 2 hours.
(Single press «+» Key, each time increase 5 degrees, all operations same way as
previous press «-» Key, each time decrease 5 degrees, Select the temperature).
NOTE: In the state of keep warm, after boiling water to the set temperature, the memory
function of lifting kettle will be started. Within ten times of kettle lifting and put back
, the water temperature is not less than 8 ⁰С of the set value, and the memory is
effective, that is, the keep warm will continue to work, and the time of keep warm will
continue to the last time. Otherwise, the memory function is not valid.
IMPORTANT! Press the buttons with your thumb
to increase the contact area.
BOILING MODE
In the setting interface, press the «ПОДОГРЕВ» key, then press «КИПЯЧЕНИЕ» key and
the buzzer will emit a sound of «Di». The screen displays the corresponding setting

Содержание

Похожие устройства

Скачать