Centek CT-0038 [18/24] Buzzer will emit a sound of di the screen displays the corresponding setting
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Centek CT-0038 [18/24] Buzzer will emit a sound of di the screen displays the corresponding setting

Centek CT-0038 [18/24] Buzzer will emit a sound of di the screen displays the corresponding setting
18
temperature of 100 °C, «КИПЯЧЕНИЕ», . Two lights are on the current temperature is
displayed on the display screen, and boiling water state at the same time. The heating
stops when the temperature reaches 100
0
С, and the buzzer emits two sounds: «Di»
«Di». «КИПЯЧЕНИЕ» Button indicator light off, 30 seconds later the display on the
temperature indicator light off.
HEAT MODE
-
In the setting interface, press the «ПОДОГРЕВ» key, then press «БЕЛЫЙ» key and
the buzzer will emit a sound of «Di». The screen displays the corresponding setting
temperature of 70 °C, «БЕЛЫЙ», . Two lights are on the current temperature is
displayed on the display screen, and boiling water state at the same time. The
heating stops when the temperature reaches 70
0
С, and the buzzer emits two sounds:
«Di» «Di». «БЕЛЫЙ» Button indicator light off, 30 seconds later the display on the
temperature indicator light off.
-
In the setting interface, press the «ПОДОГРЕВ» key, then press «ЗЕЛЕНЫЙ» key and
the buzzer will emit a sound of «Di». The screen displays the corresponding setting
temperature of 80 °C, «ЗЕЛЕНЫЙ», . Two lights are on the current temperature
is displayed on the display screen, and boiling water state at the same time. The
heating stops when the temperature reaches 80 °C, and the buzzer emits two sounds:
«Di» «Di». «ЗЕЛЕНЫЙ» Button indicator light off, 30 seconds later the display on the
temperature indicator light off.
-
In the setting interface, press the «ПОДОГРЕВ» key, then press «УЛУН» key and the
buzzer will emit a sound of «Di». The screen displays the corresponding setting
temperature of 90 °C, «УЛУН», . Two lights are on the current temperature is
displayed on the display screen, and boiling water state at the same time. The
heating stops when the temperature reaches 90 °C, and the buzzer emits two sounds:
«Di» «Di». «УЛУН» Button indicator light off, 30 seconds later the display on the
temperature indicator light off.
-
In the setting interface, press the «ПОДОГРЕВ» key, then press «+» key and the
buzzer will emit a sound of «Di». The screen displays the corresponding setting
temperature of 40 °C, «+», «-», . Three lights are on. The current temperature
is displayed on the display screen, and boiling water state at the same time. The
heating stops when the temperature reaches 40 °C, and the buzzer emits two sounds:
«Di» «Di». «+», «-» Button indicator light off, 30 seconds later the display on the
temperature indicator light off.
(single press «+» Key, each time increase 5 degrees till 100 °C. all operations
same way as previous ,select the temperature and stop heating when reach set
temperature . and the buzzer emits two sounds: «Di» «Di». press «-» Key, each time
decrease 5 degrees Select the temperature).
NOTE: In standby state, only the power button is valid, and other buttons are invalid,
and kettle under the setting state. To switch the function, press the power button again
to switch to the setting interface.)
DRY OPERATION SAFETY
The kettle is equipped with a system the automatically turns it off when it is
accidentally turned on without water or with an insufficient amount of water inside.
If the system is tripped disconnect the kettle from power supply and let it cool down
for 15 minutes.
After that you may resume operation of the appliance.
An unpleasant odor may occur if the safety is tripped.
5. MAINTENANCE
SCALE REMOVAL
Regularly remove scale using special descaling chemicals. Follow the instructions
on the packaging. You may also use a weak citric acid or vinegar solution to remove
scale. Do not try to use a more concentrated solution as it may lead to corrosion and
leaks from the appliance.
ATTENTION! The guarantee undertakings do not cover the damage caused by improper
scale removal.
CLEANING
- Always disconnect the appliance from power supply before cleaning!
- Clean the outer surfaces of the kettle, if necessary, with a slightly dampened cloth
without detergents.
- Do not submerge the kettle or base in water.
- Do not use abrasive cleaning agents and solvents to clean the kettle.
6. SPECIFICAIONS
- Nominal voltage: 220–240 V ~50/60 Hz
- Capacity: 1,7 l
- Nominal рower rating: 1850-2200 W
- Touch control
- 4 automatic temperature modes: 70, 80, 90, 100 0С
- Boiling function
- Memory for 13 settings
- Concealed LED display
7. DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately from ordinary
domestic waste. You can turn it over to a specialized electric and electronic appliance
disposal and recycling centre.
8. CERTIFICATION DATA, GUARANTEE
The service life of this item is 5 years since the date of sale to the end user, provided
the item will be used in strict accordance with the present manual and the applicable
technical standards. Upon expiry of the service life please contact the nearest
authorized service centre for suggestions as to further operation of the appliance.
The manufacturing date of the appliance is integrated into the serial number (digits
2 and 3 - year, digits 4 and 5 - month of manufacture). If any questions related to
appliance maintenance should arise, or if the appliance has malfunctions, apply to
the CENTEK TM Authorized Service Center. The address of the service center can be
found on the website https://centek.ru/servis. Service support contacts: Phone: +7
(988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina-Servis»,
Krasnodar, Phone: +7 (861) 991-05-42.

Содержание

Похожие устройства

Скачать