Home
Главная
Centek
Телевизор
CT-8540
Инструкция по эксплуатации Страница: 32

Centek CT-8540 [32/56] Next time when you attempt to open the parental control menu the tv will

Changing the Audio Settings

- In the Home Screen press , then select Sound.

- Change the settings:

•

System Sounds. Turn it off if you do not wish the RC commands (menu

navigation, text input, etc.) to be accompanied with sounds.

•

Volume Equalization. Equalizes the volume of different channels and videos, so

that the sound does not drastically change when switching between channels.

•

3-D Sound. Processes the sound in such a way that it has a surround effect

even from the 2 speakers of the TV.

•

Audio Mode. Sound settings selected for the specific type of video. Select the

mode that corresponds to what you watch most often: e.g. the Music mode

will be best for music video clips.

•

Digital Audio Output. Select between digital or analog audio signal transmitted

to the external audio system. Select PCM to force digital audio output, Auto —

the TV will independently determine the type of transmitted audio signal and

OFF if you don’t wish to transmit digital audio. Some audio systems cannot

receive digital audio signal. In this case turn digital audio output off or switch

it to Auto.

TV Channel Setup

Search for Analog Channels

- Connect the antenna to the TV as shown in the “Antenna Connection” section.

In the Home Screen press , then select Channel Setup and choose Analog TV.

If you wish to find all available channels, click on Automatic Channel Setup. To

add a channel manually, select Manual Channel Setup and enter the parameters

of the desired channel.

Find Digital Channels (Antenna)

- Connect the antenna to the TV as shown in the “Antenna Connection” section.

If the TV service provider requires the use of a decoder card, insert the card

into the COMMON INTERFACE slot on the back panel of the TV.

In the Home Screen press , then select Channel Setup and choose Digital

TV (Antenna).

- In the Country list, find your country.

Select the channel storage procedure. Activate the LCN option to store the

channels in the sequence defined by the TV broadcast provider, or deactivate

it if you wish that the channels are arranged according to frequency. This option

is only available with automatic channel setup.

If you wish to find all available channels, click on Automatic Channel Setup. To

add a channel manually, select Manual Channel Setup and enter the parameters

of the desired channel.

Find Digital Channels (Cable TV)

- Connect the antenna to the TV as shown in the “Antenna Connection” section.

If the TV service provider requires the use of a decoder card, insert the card

into the COMMON INTERFACE slot on the back panel of the TV.

In the Home Screen press , then select Channel Setup and choose Digital

TV (Cable).

- In the Country list, find your country.

If you wish to find all available channels, click on Automatic Channel Setup. To

add a channel manually, select Manual Channel Setup and enter the parameters

of the desired channel.

Find Satellite Channels

- Find out the satellite connection parameters from your satellite TV provider:

• Satellite names, longitude direction and angles, group (band).

•

Satellite transponder specifications: frequency, data transfer speed, polarity.

•

Specifications of your satellite dish, converters (LNB) and switchers: converter

type, DiSEqC protocol version and switching signal tone, as well as if the

switcher supports the Toneburst technology.

- Connect the antenna to the TV as shown in the “Antenna Connection” section.

If the TV service provider requires the use of a decoder card, insert the card into

the COMMON INTERFACE slot on the back panel of the TV. You can find detailed

information on the card in the “Connecting a CI+ Conditioned Access Module”.

In the Home Screen press , then select Channel Setup and choose Satellite TV.

Check if the parameters of each satellite at which the antenna is aimed are

specified correctly: find the satellite on the list, then press and hold the ОК

button on the RC; a popup menu will appear. Select Edit in the menu. If the

desired satellite is not on the list, press and enter the parameters of the

satellite.

Select the satellite, go to the Transponder list and find the transceivers of

the satellites from which the antenna will receive the signal. Check if the

parameters of each transponder are specified correctly: select the transponder,

then press and hold the ОК on the RC; a popup menu will appear. Select Edit.

Select the satellite, go to the Scanning Parameters list and enter the switcher

and converter settings.

- Press Start Search and specify the search parameters:

•

Search Type. Select Network Search, if you have specified the correct

transponders; the TV will quickly poll them and compile a list of channels.

If you are not sure that the transponder parameters are set up correctly,

use the Blind Search option; the TV will scan the whole frequency range of

the satellites and independently detect the transponders and the channels

available on them.

•

Channel Type. If you want the TV to store only free-of-charge channels,

select Free Channels. In order to store both free and paid channels, choose

All Channels.

• Service Type. Specify which type of channels will be stored: television (DTV),

radio or all.

Click Start Search and wait for the satellite scan to complete. This can take

up to 30 minutes.

Add Channel to Favorites

The selected channels will be displayed in the Favorites group of the channel list,

so they can be found quickly.

To add a channel:

- In the Home Screen, press TV.

Select a channel, then press and hold the ОК button on the RC until the symbol

appears near the channel name.

Activate Child Mode

- In the Home Screen press , then select Device Settings and choose Parental

Control.

Set the access code: children will not be able to change parental control settings

without knowing the password.

- Select the level of search filtration and age limitations.

Next time when you attempt to open the Parental Control menu, the TV will

require the current PIN code to be entered. If you forget the code and enter

the wrong code five times, the TV will require the code to be reset. Enter the

master PIN code 0000, then define the new code.

Re-Connect to the Internet

If the TV has been connected to the Internet with a cable, disconnect it and re-

connect as described in the “Connecting External Devices” section.

To re-connect the TV to Wi-Fi:

Disconnect the cable from the LAN port if the TV has been connected to the

Internet with the cable.

- In the Home Screen press , then select Network.

If you want to re-connect the TV to a network the password of which has been

changed, delete it first. To do this, select the network in the available networks

list and click Delete the Network.

Find the desired network in the list of available networks and enter its access

password.

Add Account

If you use the TV together with your family, add the accounts of your family

members to the TV. You will be able to switch between accounts: the watching

history will not be mixed, therefore the lists of TV channels and videos

recommended for each family member will be more accurate.

To add an account, in the Home Screen press , select Add User and follow the

instructions on the screen. The added account will automatically become active –

the recommendations will be chosen taking into account the owner’s preferences,

his/her Plus or KinoPoisk subscriptions will also be used.

If any of the accounts is no longer needed, exit from it: in the Home Screen press

, then choose an account and press Exit Account.

Update Software

The TV automatically searches for software updates and installs them. If you wish

to check the current software version or update it manually, proceed as follows:

- In the Home Screen, press , then go to the Device Settings section.

- Select About the Device. The current software version will be displayed in the

Build section. In order to update the software, press System Update.

Restore Default Settings

In the Home Screen, press , then go to the Device Settings section and select

Storage and Reset. Press Default Settings, confirm the action and wait for the

reset to complete. Then set up the TV once again.

Centek CT-8540 [32/56] Next time when you attempt to open the parental control menu the tv will

Содержание

Похожие устройства