Home
Главная
Skil
Шлифовальная Машина
7338 LA
Инструкция по эксплуатации Страница: 6

Skil 7338 LA Инструкция по эксплуатации онлайн [6/100] 92514

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

dierent from those intended could result in a hazardous

situation.

5) SERVICE

a) Haveyourpowertoolservicedbyaqualiedrepair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

SAFETY INSTRUCTIONS FOR SANDERS

GENERAL

• This tool should not be used by people under the age

of 16 years

• Use completely unrolled and safe extension cords with a

capacity of 16 Amps (U.K. 13 Amps)

• Never use the tool when cord is damaged; have it

replaced by a qualied person

• This tool is not suitable for wet sanding

• Dust from material such as paint containing lead, some

wood species, minerals and metal may be harmful

(contact with or inhalation of the dust may cause allergic

reactions and/or respiratory diseases to the operator or

bystanders); wear a dust mask and work with a dust

extraction device when connectable

• Certain kinds of dust are classied as carcinogenic

(such as oak and beech dust) especially in conjunction

with additives for wood conditioning; wear a dust

mask and work with a dust extraction device when

connectable

• Follow the dust-related national requirements for the

materials you want to work with

• Do not work materials containing asbestos

(asbestos is considered carcinogenic)

• When sanding metal, sparks are generated; do not

use vacuum cleaner and keep other persons and

combustible material from work area

• Regularly clean the power tool’s air vents (the

motor’s fan will draw the dust inside the housing and

excessive accumulation of powdered metal may cause

electrical hazards)

• Always disconnect plug from power source before

making any adjustment or changing any accessory

ACCESSORIES

• SKIL can assure awless functioning of the tool only

when original accessories are used

• Do not continue to use worn, torn or heavily clogged

sanding sheets

BEFORE USE

• Always check that the supply voltage is the same as the

voltage indicated on the nameplate of the tool

• Avoid damage that can be caused by screws, nails and

other elements in your workpiece; remove them before

you start working

• Secure the workpiece (a workpiece clamped with

clamping devices or in a vice is held more securely than

by hand)

DURING USE

• The noise level when working can exceed 85 dB(A);

wear ear protection

• Wear protective gloves, safety glasses, close-tting

clothes and hair protection (for long hair)

• Always keep the cord away from moving parts of the

tool; direct the cord to the rear, away from the tool

• Do not touch the moving sanding sheet

• In case of electrical or mechanical malfunction,

immediately switch o the tool and disconnect the plug

• If the cord is damaged or cut through while working, do

not touch the cord, but immediately disconnect the plug

AFTER USE

• When you put away the tool, switch o the motor and

ensure that all moving parts have come to a complete

standstill

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):

• Do not connect the blue (= neutral) or brown (= live) wire

in the cord of this tool to the earth terminal of the plug

• If for any reason the old plug is cut o the cord of

this tool, it must be disposed of safely and not left

unattended

USE

• Mounting of sanding sheet

! disconnect the plug

- if necessary, clean backing pad rst

! perforation in sanding sheet should correspond

with perforation in sanding foot

! the dust suction requires the use of perforated

sanding sheets

! always use the tool with the total sanding surface

covered with sanding paper

! replace worn sanding sheets in time

• On/o switch

- switch on/o the tool by pushing switch A

forward/

backwards

! before the sanding surface reaches the

workpiece, you should switch on the tool

! beforeswitchingothetool,youshouldliftit

from the workpiece

• Dust suction

- connect vacuum cleaner to connection B

! do not use vacuum cleaner when sanding metal

• Holding and guiding the tool

! whileworking,alwaysholdthetoolatthegrey-

coloured grip area(s)

- guide the tool parallel to the working surface

- do not apply too much pressure on the tool; let the tool

do the work for you

- do not tilt the tool in order to avoid unwanted sanding

marks

- keep ventilation slots C

uncovered

• Sanding

- the amount of material removed is determined by

the selection of the sanding sheet and the applied

pressure

! intensiyingthesandingpressuredoesnotlead

to an increase of the sanding capacity, but to

increased wear of the tool and the sanding sheet

! never use the same sanding sheet for wood and

metal

Skil 7338 LA Инструкция по эксплуатации онлайн [6/100] 92514

Содержание

Похожие устройства