Aten CS1944DP [6/16] Verification

CS1942DP / CS1944DP RS-232 Commands

RS-232 Commands

After you login via HyperTerminal (see Console Login - HyperTerminal) use

the instructions below to send RS-232 commands to control the switch from the

computer.

When RS-232 control is enabled via the Open + [Enter] command, the

CS1942DP / CS1944DP’s front panel pushbuttons, mouse switching and

hotkeys will be disabled.

For detailed information about the controls listed in this guide, please refer to

the CS1942DP / CS1944DP user manual.

Verification

After entering a command, a verification message appears, as shown below, at

the end of the command line, as follows:

With all commands in the sections that follow:

 Each command string can be separated with a space.

 The [Enter] command can be replaced with the ASCII code: 0x0D0A

Response Message Description

Command OK Command or parameter is correct.

Command incorrect Command or parameter is incorrect.