Aten CS1944DP [7/16] Open close

CS1942DP / CS1944DP RS-232 Com-

Open / Close

The Open and Close commands allows you to start and end the link between

the computer sending RS-232 commands and the CS1942DP / CS1944DP.

When the link is open, the CS1942DP / CS1944DP only accepts RS-232

commands and will not respond to front panel pushbuttons, mouse switching

and hotkeys. The link starts with the open command and ends with the close

command or after 2 minutes if no command is sent. The default value is close.

Note: To regain full control of front panel pushbuttons, mouse switching, and

hotkeys, close the RS-232 link command and slide the DCC Switch to

the P position (Primary).

Use the Formula - to set Parameters - to create a Command.

Formulas:

Command + [Enter]

Parameters:

Open/Close RS-232 Link Command

The available formulas for the Open/Close RS-232 Link commands are as

follows:

1. Command + [Enter]

For example, to open the RS-232 link between the computer and CS1942DP /

CS1944DP, type the following:

open [Enter]

2. Command + [Enter]

For example, to close the RS-232 link between the computer and CS1942DP /

CS1944DP, type the following:

close [Enter]

Command Description

open Open RS-232 Link command

close Close RS-232 Link command

Enter Description

Enter Enter and send out command