Aten CS1924M [7/17] Open close

CS1922M / CS1924M RS-232 Commands

Open / Close

The Open and Close commands allows you to start and end the link between

the computer sending RS-232 commands and the CS1922M / CS1924M. When

the link is open, the CS1922M / CS1924M only accepts RS-232 commands and

will not respond to front panel pushbuttons, mouse switching and hotkeys –

until the link is closed. The link starts with the open command and ends with

the close command or after 2 minutes if no command is sent. The default value

is close.

Use the Formula - to set Parameters - to create a Command.

Formulas:

Command + [Enter]

Parameters:

Open/Close RS-232 Link Command

The available formulas for the Open/Close RS-232 Link commands are as

follows:

1. Command + [Enter]

For example, to open the RS-232 link between the computer and CS1922M /

CS1924M, type the following:

open [Enter]

2. Command + [Enter]

For example, to close the RS-232 link between the computer and CS1922M /

CS1924M, type the following:

close [Enter]

Command Description

open Open RS-232 Link Command

close Close RS-232 Link Command

Enter Description

Enter Enter and send out command