Aten CS1142D [22/45] Before you begin

ATEN Secure KVM User Manual

11

Chapter 2

Hardware Setup

Before You Begin

intrusion to the switches enclosure. If the tamper-evident seal is missing, peeled, or looks as if it’s

been adjusted, avoid using the product and contact your ATEN dealer.

2. The ATEN Secure KVM Switch is equipped with active always-on chassis intrusion detection. If a

mechanical intrusion is detected, the switch will be permanently disabled and all the front panel

LEDs (except the Power LED) will flash continuously. If the switches’ enclosure appears breeched

or all the LEDs are flashing continuously, stop using it, remove it from service immediately and

contact your ATEN dealer.

3. Any attempt to open the switches enclosure will activate the chassis intrusion detection security,

which will render it inoperable and void the warranty.

4. The ATEN Secure KVM Switch cannot be upgraded, serviced or repaired.

Use always qualified and authorized peripheral devices

1. For security, the ATEN Secure KVM Switch supports only standard USB or PS/2 keyboard/mouse

(or pointing device). Do not connect a wireless keyboard/mouse, or any keyboard/mouse with an

internal USB hub or composite device function to the switch.

2. When connecting a non-qualified keyboard, the keyboard will not function. No keyboard

keystrokes will be seen on the screen.

3. When connecting a non-qualified mouse, the mouse will not function. No mouse cursor movement

will be seen on the screen.

If any tamper-evident seal is missing or peeled, avoid using the

product and contact your ATEN dealer.