Fubag RW61 100111 [2/10] Safety rules

Omperator's anual

www.fubag.ru

- 1 -

WARNING! BEFORE USINGAIR PLEASE READ THIS INSTRUCTION MANUAL

CAREFULLY.

ONLY QUALIFIED AND WELL-TRAINED STAFF ACQUAINTED WITH THE MANUAL

CAN USEAND OPERATE THIS TOOL.

TOOL

The operation manual contains the description, safety rules and all the information necessary for

proper maintenance of FUBAG pneumatic tool. Please keep the operation manual and refer to it in

case of any questions concerning safety operation, maintenance, storage and transportation of

FUBAG tool. Nonobservance of the indicated recommendations may cause the damage of the tool

and injuries of the user.

1. Safety rules

- General safety requirements are to conform to EN 792-9.

- Only the persons who have taken the preliminary training and are aware of the tool

structure, safety rules and the requirements of the operation manual can operate the tool.

- Vibration characteristics of the tool correspond to EN ISO 8662-1 requirements. The use of

the tool is not allowed for the operations when vibration levels exceed the values

established by EN ISO 8662-1.

- Noise characteristics of the tool correspond to EN ISO 11202 requirements. The corrected

level of the noise power does not exceed 99 dBA. The use of the tool is not allowed for the

operations when noise levels exceed the values established by EN ISO 11202.When

operating the tool it is strongly recommended to use the protective spectacles, headphones

and protective gloves.

- Always keep the steady foot rest in order not to stumble. Always fasten the workpiece with a

fixer or a grip to release two hands for operating with the tool.

- The tool with the ratchet mechanism may give a return and cause an injury if the nut is run

too tightly. In this case use the manual tool to slacken the nut before the nutrunner use.

- Sudden movement of the tool on account of the reaction force or the break down of the

drive socket may cause an injury.

- In case of the drive socket destruction it may become dangerous for the personnel because

of the smashed parts.

- Avoid whipping with the air compressed hose.

- The tool is not eclectically isolated thus avoid its contact with the electricity sources.

- Make sure all the clothes fit closely to the body.

- Make sure there are not any foreign objects in the place of operation; and there are not any

people in the proximity of the operating tool.

- The workplace is to be aired well.

- Make sure the tool is in OFF position before connecting the air hose.

- Always disconnect the tool from the aerial system when it is not used.

- Do not pull the hose when transporting the tool.