SNR S2989G-48TX-POE [271/553] Multicast vlan configuration task list

Превью страниц Страница 271 / 553
SNR S2989G-24TX-POE [271/553] Multicast vlan configuration task list
S2989G-24TX Operation Manual
Chapter 5 Multicast Protocol Related Configuration
4-46
VLAN will share the same multicast VLAN. The multicast traffic only exists within a
multicast VLAN, so the bandwidth is saved. As the multicast VLAN is absolutely separated
from the user VLAN, security and bandwidth concerns can be met at the same time, after
the multicast VLAN is configured, the multicast traffic will be continuously sent to the
users.
5.5.2
Multicast VLAN Configuration Task List
1. Enable the multicast VLAN function
2. Configure the IGMP Snooping
3. Configure the MLD Snooping
1. Enable the multicast VLAN function
Command
Explanation
VLAN configuration mode
multicast-vlan
no multicast-vlan
Configure a VLAN and enable the multicast
VLAN on it. The no multicast-vlan
command disables the multicast function on
the VLAN.
multicast-vlan association <vlan-list>
no multicast-vlan association <vlan-list>
Associate a multicast VLAN with several
VLANs. The no form of this command
deletes the related VLANs associated with
the multicast VLAN.
multicast-vlan association interface
(ethernet | port-channel|) IFNAME
no multicast-vlan association interface
(ethernet | port-channel|) IFNAME
Associate the specified port with the
multicast VLAN, so the associated ports are
able to receive the multicast flow. The no
command cancels the association between
the ports and the multicast VLAN.
multicast-vlan mode {dynamic|
compatible}
no multicast-vlan mode {dynamic|
compatible}
Configure the two modes of multicast vlan.
The no command cancels the mode
configuration.
2. Configure the IGMP Snooping
Command
Explanation
Global Mode
ip igmp snooping vlan <vlan-id>
no ip igmp snooping vlan <vlan-id>
Enable the IGMP Snooping function on the
multicast VLAN. The no form of this
command disables the IGMP Snooping on

Содержание

666