SNR S2989G-48TX-POE — настройка функций безопасности и управление ACL в сетевых устройствах [296/553]

Превью страниц Страница 296 / 553
SNR S2989G-24TX [296/553] Acl troubleshooting
S2989G-24TX Operation Manual
Chapter 6 Security Function Configuration
6-23
Switch (Config-Vlan100)#switchport interface ethernet 1/0/1;2;5;7
Switch (Config-Vlan100)#exit
Switch (config)#access-list 1 deny host-source 192.168.0.1
Switch (config)#interface ethernet1/0/1;2;5;7
Switch (config-if-port-range)#ip access-group 1 in
Switch (Config-if-Vlan100)#exit
Configuration result:
Switch (config)#show access-group interface vlan 100
Interface VLAN 100:
Ethernet1/0/1: IP Ingress access-list used is 1, traffic-statistics Disable.
Ethernet1/0/2: IP Ingress access-list used is 1, traffic-statistics Disable.
Ethernet1/0/5: IP Ingress access-list used is 1, traffic-statistics Disable.
Ethernet1/0/7: IP Ingress access-list used is 1, traffic-statistics Disable.
6.1.4
ACL Troubleshooting
Checking for entries in the ACL is done in a top-down order and ends whenever an
entry is matched.
Each ingress port can bind one MAC-IP ACL, one IP ACL, one MAC ACL, one IPv6
ACL (via the physical interface mode or Vlan interface mode).
When binding four ACL and packet matching several ACL at the same time, the
priority relations are as follows in a top-down order. If the priority is same, then the
priority of configuration at first is higher.
Ingress IPv6 ACL
Ingress MAC-IP ACL
Ingress IP ACL
Ingress MAC ACL
The number of ACLs that can be successfully bound depends on the content of the
ACL bound and the hardware resource limit. Users will be prompted if an ACL cannot
be bound due to hardware resource limitation.
If an access-list contains same filtering information but conflicting action rules,
binding to the port will fail with an error message. For instance, configuring “permit tcp
any any-destination” and “deny tcp any any-destination” at the same time is not
permitted.
Viruses such as “worm.blaster” can be blocked by configuring ACL to block specific
ICMP packets or specific TCP or UDP port packet.

Содержание

666

Изучите, как настраивать функции безопасности и управлять списками контроля доступа (ACL) на сетевых устройствах. Узнайте о приоритетах и ограничениях при связывании ACL.