SNR S2989G-48TX-POE — настройка порт-каналов и агрегации в сетевых устройствах [92/553]

Превью страниц Страница 92 / 553

2-28

S2989G-24TX Operation Manual Chapter 2 Layer 2 services

Configuration

be connected with cables.

The configuration steps are listed below:

Switch1#config

Switch1(config)#interface ethernet 1/0/1-4

Switch1(Config-If-Port-Range)#port-group 1 mode active

Switch1(Config-If-Port-Range)#exit

Switch1(config)#interface port-channel 1

Switch1(Config-If-Port-Channel1)#

Switch2#config

Switch2(config)#port-group 2

Switch2(config)#interface ethernet 1/0/6

Switch2(Config-If-Ethernet1/0/6)#port-group 2 mode passive

Switch2(Config-If-Ethernet1/0/6)#exit

Switch2(config)#interface ethernet 1/0/8-10

Switch2(Config-If-Port-Range)#port-group 2 mode passive

Switch2(Config-If-Port-Range)#exit

Switch2(config)#interface port-channel 2

Switch2(Config-If-Port-Channel2)#

Configuration result:

Shell prompts ports aggregated successfully after a while, now ports 1, 2, 3, 4 of S1

form an aggregated port named “Port-Channel1”, ports 6, 8, 9, 10 of S2 form an

aggregated port named “Port-Channel2”; can be configured in their respective aggregated

port mode.

Scenario 2: Configuring Port Channel in ON mode.