SNR VG-1000-8S [12/83] Basic operations

SNR-VG-1000-8S VoIP Gateway User Manual

Basic Operations

2.1 Methods to Number Dialing

Dial mobile phone or extension number

Dial the number directly and wait for 3 seconds (Default “No dial timeout”);

Dial the number directly and press #.

2.2 Direct IP Calls

The SNR-VG-1000-8S gateway allows users to directly call through IP address. Under this

circumstance, the user only needs an analog phone which is connected to a FXS port of the gateway,

and calls can be established without register.

Calls can be established through IP address as long as one of the following conditions is met.

Both the SNR-VG-1000-8S and other VoIP device have public IP addresses;

The SNR-VG-1000-8S and other VoIP device use private IP addresses of a same LAN;

The SNR-VG-1000-8S and other VoIP device can be connected through a router and use public or

private IP addresses (with necessary port forwarding or DMZ).

Operation Process：

Step1: Pick up the analog phone and then dial “*47”;

Step2: Enter the target IP address.

【Note】: No dial tone will be played between step 1 and step 2

Example:

Assume that the target IP address is 192.168.0.160, user need to dial *47 and then 192*168*0*160.

After that, press the “#” key or wait 3 seconds. Then signaling interaction is completed and ringing

can be heard .

【Note】:You cannot make direct IP calls between FXS0 to FXS1 of a same SNR-VG-1000-8S since they

are using same IP addresses. Call through IP address is only routed to the default destination port

5060.