Infiniti EX35 (2008) [38/448] Child restraint installation using latch

Infiniti EX35 (2008) [38/448] Child restraint installation using latch
Install the top tether strap as follows:
1. Position the top tether strap over the top
of the head restraint with the head re-
straint in the full “down” position.
2. Secure the tether strap to the tether an-
chor point on the seat directly behind the
child restraint.
3. Tighten the tether strap according to the
manufacturer’s instructions to remove
any slack.
For best child restraint fit, see the child re-
straint installation instructions in this section
and the child restraint manufacturer’s instruc-
tions.
If you have any questions when installing a top
tether strap child restraint on the rear seat, con-
sult your INFINITI dealer for details.
CHILD RESTRAINT INSTALLATION
USING LATCH
WARNING
Attach LATCH compatible child restraints
only at the locations shown. For the LATCH
lower anchor locations, see “Lower Anchors
and Tethers for CHildren SYSTEM (LATCH)”
earlier in this section. If a child restraint is
not secured properly, your child could be
seriously injured or killed in an accident.
The LATCH anchors are designed to with-
stand only those loads imposed by correctly
fitted child restraints. Under no circum-
stance are they to be used for adult seat
belts or harnesses.
Inspect the lower anchors by inserting your
fingers into the lower anchor area and feel-
ing to make sure there are no obstructions
over the LATCH anchors, such as seat belt
webbing or seat cushion material. The child
restraint will not be secured properly if the
LATCH anchors are obstructed.
Front-facing
Follow these steps to install a front-facing child
restraint using LATCH:
1. Position the child restraint on the seat.
Always follow the child restraint manufac-
turer’s instructions.
Front facing step 2
SSS0645
1-22 Safety Seats, seat belts and supplemental restraint system
w
11/14/07—debbie
X

Содержание

Похожие устройства

Скачать