Samson Meteor Mic [17/24] Recording techniques

Meteor Mic · USB Studio Condenser Microphone

Acoustic Guitar

There are a variety of ways that the Meteor Mic can be used to mike an acoustic guitar. Optimal

microphone placement will depend on the type of instrument, and what kind of sound you’re

looking to capture. It may be necessary to experiment with

various positions to achieve full and balanced tone. When

miking a standard steel string acoustic, it is suggested that you

begin with the microphone at a distance of 6–12 inches from

the sound hole, positioned slightly o-axis, and pointing to-

wards the edge of the ngerboard. From this position, moving

the microphone towards the sound hole will cause the mic to

capture more low frequencies. If, instead, you wish to capture

more high-end, or to remove any unwanted boominess, move

the microphone toward the ngerboard. Unlike a steel string acoustic guitar, the sound of a nylon

string acoustic guitar that is played by nger picking is usually naturally warmer. To record an

even, full tone, it is suggested that you begin by positioning the microphone 3–6 inches above

the center of the bridge. This will help emphasize the higher frequencies and pick up the attack

sound of the nger picking. If the microphone is picking up too much low frequency from the

sound hole, move the microphone so that it is slightly o-axis from the guitar. If you have a pair of

Recording Techniques