AMERICAN DJ Vertigo HEX LED [3/4] Vertigo hex led operation

Vertigo HEX LED Operation

ADJ Product, LLC - www.adj.com - Vertigo HEX LED Instruction Manual Page 5ADJ Product, LLC - www.adj.com - Vertigo HEX LED Instruction Manual Page 4

Trouble Shooting: Listed below are a few common problems that

you may encounter, with solutions.

No light output from the unit;

1. Be sure the fuse has not blown. The fuse is located on the rear

panel.

Unit does not respond to sound;

Fixture Cleaning: Due to fog residue, smoke, and dust cleaning the

internal and external optical lenses must be carried out periodically to

optimize light output.

1. Use normal glass cleaner and a soft cloth to wipe down the

outside casing.

2. Use a brush to wipe down the fan grill.

3. Clean the external optics with glass cleaner and a soft cloth every

20 days.

4. Clean the internal optics with glass cleaner and a soft cloth

every 30-60 days.

Introduction: The ADJ Vertigo HEX LED is a 6-in-1 LED moon-ower

effect. This fixture is designed for mobile DJ’s, clubs, bands, roller

rinks and any arena that requires a compact, light weight, easy to use

unit.

General Operation: This fixture is designed to operate as a stand

alone sound active unit, there is no need of a controller. It has been

tested and there is no assembly necessary. The Vertigo HEX LED is

ready to be plugged in out of the box, there is no power switch. Plug

the unit in to a matching power outlet or into a power pack. Light

output will be immediate when the unit is powered on. The unit must

head screw driver unscrew the fuse holder. Remove the bad fuse and

replace with a new one.

With this feature you can connect the xtures to one another

using the IEC input and output sockets. The quantity that can be

connected is 10 xtures maximum. After 10 xtures you will need

to use a new power outlet. They must be the same xtures. DO

NOT mix xtures.

Vertigo HEX LED Power Cord Daisy Chain