APart CM6QFT [3/4] Mounting instructions

INFO@APART-AUDIO.COM

The loudspeaker is easy to install, due to its simple, quick mounting system.

Remove the grill before mounting, use the special grille removal tool and carefully

take out the grille.

Make sure the mounting clamps are turned inwards, if this is not the

case, insert the hex key in all four holes on the front and turn it

180 degrees counterclockwise until you hear a click. Insert the speaker

in the ceiling and activate the automatic clamp system. Use the supplied

hex key, but this time you insert the round side in the four holes on

the front. Push the key to release the 4 clamps. Carefully push

the grille back in place. That’s it.

Mounting instructions

Use this round side to push

the key to release the 4 clamps.

Use this hex side to load the

spring of the clamps.

Mounting Dis-mounting

Position the speaker in the ceiling.

Activate the spring clamps by pushing the four

spring clamp buttons with the round end of

the tool.

Turn the spring clamps 180º counter-

clockwise until you hear a click.

Take out the speaker.