Korg KR-55 Pro [7/44] Connecting and playing instruments

Korg KR-55 Pro [7/44] Connecting and playing instruments
Listening to the demo performances
7
3. In System mode, specify the type of baeries that you’re
using.
(Default seing aL: Alkaline baeries)
If you switch to using a dierent type of baery, be sure to
specify the correct baery type in System mode.
See “[M1] Baery type “ba”” on page 23 of the
Owners Manual
Replacing the batteries
Replace the baeries when the power buon blinks.
As the baeries run low, you might hear noise or
interruptions in the sound.
Unusable baeries should be removed immediately. If
unusable baeries are le installed in the unit, they may leak,
causing malfunctions. You should also remove the baeries if
you don’t plan to use the unit for an extended time.
Be sure to replace all six baeries together as a set. Do not
mix fresh baeries with used baeries in the same set.
Turning the power on
Note: If a device is connected to the AUX IN jack, turn its
power on before you continue.
Note: If you’re using an SD card, insert it into the SD card slot
before you turn on the power (see page 6 “Inserting or
removing an SD card”).
1. On the top panel, set the VOLUME knob to the
minimum level (far le).
2. On the top panel, hold down the power button for at
least one second to make the button light.
When the KR-55 Pro nishes starting up, it is ready to
produce sound.
3. Turn on the power of the external equipment that is
connected to the KR-55 Pros OUTPUT L/MONO and R
jacks, such as powered monitor speakers.
4. Adjust the volume on the external output device and on
the KR-55 Pro.
Turning the power o
Never turn o the power or disconnect the AC adapter
during recording, while data is being converted, or while
data is being wrien to the system.
Doing so may make the KR-55 Pro malfunction, or
damage the data on the SD card. If the data on the SD card
has been damaged, format the card.
1. If recording or playback is occurring, press the
[ ] buon to stop.
2. Hold down the power buon for one second or longer
until the buon blinks.
Aer a time, the power buon and display indication will
go dark, and the KR-55 Pro will shut down.
Use caution when turning o the power!
To turn o the power of the KR-55 Pro, you must press the
power buon located on the panel. (When you do this, the
KR-55 Pro saves its data.)
Never disconnect the AC adapter or remove the baeries
while the power is on.
Auto Power-O
The KR-55 Pro has an auto power-o function. The auto
power-o function automatically turns o the power when
there has been no user input for a certain length of time
(which you can specify).
(See "[M3] Auto power-o function “APOF”" on page 23 of
the Owner's Manual.)
Listening to the demo
performances
The KR-55 Pro contains demo song data. Let’s start by
listening to the sound of the KR-55 Pro.
1
4
3
1
2
1. Simultaneously press the [SYSTEM] buon and [Count
Start] buon to enter Demo mode.
The [SYSTEM] buon and [Count Start] buon blink, and
the demo song plays.
The top panel buons light in synchronization with the
demo song.
2. Use the VOLUME knob to adjust the volume of the
demo song.
3. You can press the [
] or [ ] buons to play the
previous or next demo song.
4. To exit Demo mode, press any one of the mode buons
[RHYTHM], [RECORDER], [PLAYER], or [SYSTEM].
Connecting and playing
instruments
The KR-55 Pro provides a mic input, two inputs for guitar or
bass, and an AUX input, allowing multi-channel mixing. A
variety of input sources are supported, including guitar, bass
guitar, and a microphone.

Содержание

Похожие устройства

Скачать