Главная
Skipped breadcrumb items
Z-1000-II (X)
Руководство по эксплуатации Страница: 6

Главная
Antari
Z-1000-II (X)
Руководство по эксплуатации Страница: 6

Antari Z-1000-II (X) — устранение неполадок и технические характеристики дымовых машин [6/36]

Превью страниц Страница 6 / 36

Antari Z-1000-II (X) [6/36] Z 10 z 40 z 50 remote controller

Note: A fluid level sensor is installed on the unit. The machine will stop to fog if the fluid is lower than usable

level.

If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the

external fuse, remote control connection and power from the wall. If all of the above appears to be O.K.,

plug the unit again. If fog does not come out after holding the remote button down for 30 seconds, check

the hose attached to the tank to make sure there is fluid going through the hose. If you are unable to

determine the cause of the problem, do not simply continue pushing the remote button, as this may

damage the unit. Return the machine to your ANTARI dealer.

Technical Specifications

Model

Z-800II

Z-1000II

Z-1020

Power Supply

AC100-120V, AC 220-240V / 50HZ - 60HZ

Power Consumption

800 W

1,000 W

Output Volume

85 m³/min.

284 m³/min.

Tank Capacity

0.8 liters

1.7 liters

2.4 liters

Fluid Consumption

60 min./ 0.8 liter

18 min./ liter

11 min./ liter

Weight

3.5 kg

6.6 kg

9.8 kg

Dimensions (LxWxH)

315 x 128 x 165.5 mm

433 x 198 x 151 mm

370 x 295 x 135 mm

Remote Included

Z-10

Optional Remote

Z-40, Z-50

Warm-up Time

1.7 min.

5.5 min.

11 min.

Remote Control Operation

 Z-10: 10 meter wired remote controller with 6,3 mm jack plug of ANTARI Fog Machine models Z-800II, Z-

1000II and Z-1020. The red lamp indicates that the unit is receiving power. When the fog machine has

reached operating temperature the green light on this remote control will light up, indicating that the

operator may begin fog emission by pressing the red button. The green light flashes during fog machine

warm-up and re-heating cycles (approx. 1-2 minutes), and stays ON when the machine becomes

operational. The Z-10 features the “toggle switch’’ function: press once for continuous “ON”, press again to

release continuous “ON” function

 Z-40: 10 meter wired remote controller with 6,3 mm jack plug for ANTARI Fog Machine models Z-800II, Z-

1000II and Z-1020. Its two knobs allow the operator to customize fog machine functions by adjusting

output duration and interval. Press the yellow TIMER-button to activate the timer function. Adjust the

interval between each fog emission (within the range of 10 second to 250 seconds) by means of the

INTERVAL control knob. Adjust the duration of each fog emission (within the range of 10 to 120 seconds)

by means of the DURATION control knob. When pressed, the green FOG button overrides all other

control functions and activates maximum output. Press the red POWER ON/OFF button for continuous

output.

 Z-50: Wireless remote controller with 6,3 mm jack plug for ANTARI Fog Machine models Z-800II, Z-1000II

and Z-1020. A remote operation is possible up to a distance of 50 meters. Keep the red button pressed for

fogging.

Z-10, Z-40, Z-50 Remote Controller

Antari Z-1000-II (X) — устранение неполадок и технические характеристики дымовых машин [6/36]

Содержание

Похожие устройства