Antari Z-1000-II (X) — рекомендации по тестированию и настройке DMX для машин тумана [8/36]

Превью страниц Страница 8 / 36

2. It is strongly recommended to test-run the machine on a monthly basis in order to achieve its best fogging

condition. A test-run consists of warming up the machine followed by a few minutes of emission. After that,

follow Step 1 under Storage.

Please read and save these instructions.

DMX Connector Pin Assignment

The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below indicate pin assignment

information

Function

Ground

Data-

Data+

Antari Z-1000II & Z-1020 on-board DMX Fog Machine Settings

DMX Setting for Z-1000II and Z-1020 fog machines with on board DMX

Channel A

0 - 128 = OFF

129 – 255 = Maximum Volume Output (100%)

The Z-1000II and Z-1020 Fog Machine have on-board DMX control except on Z-800II. These two models

use 1 channel to control on/off operation. Each channel has a value range of 0 to 255. On/Off function

can be programmed using the DMX controller or the DMX control software being

used by lighting and effects operator.