Al-Ko SnowLine 760TE [33/328] Maintenance and care

Al-Ko SnowLine 760TE [33/328] Maintenance and care
GB
33474911_a
Snow Line 700E, 760TE
Maintaining the wheel drive
Adjusting the control cable
If the wheel drive no longer engages when the
engine is running, the control cable must be ad-
justed.
Caution!
Switch off the engine before adjusting the
control cable.
Ifthewheeldrivemechanismcannotbe
disengaged, switch off the engine. Do not
attemptrepair;contactaqualiedworkshop.
1. Loosen lock nut ( 2-1).
2. Turn the adjuster on the control cable in the
direction of the arrow (
2-2) until the con-
trol cable no longer sags (is slightly tensi-
oned). Hold the cable while tightening so that
it does not twist.
3. Tighten the lock nut(
2-1) firmly.
4. Check the adjustment by starting the engine
and engaging the wheel drive.
5. If the wheel drive still does not engage and
disengage properly, have the machine re-
paired by a qualified workshop.
Maintaining the auger drive
Adjusting the control cable
If the auger drive no longer engages when the
engine is running, the control cable must be ad-
justed.
Caution!
Switch off the engine before adjusting the
control cable.
Iftheaugerdrivemechanismcannotbe
disengaged, switch off the engine. Do not
attemptrepair;contactaqualiedworkshop.
1. Loosen lock nut ( 2-1).
2. Turn the adjuster on the control cable in the
direction of the arrow (
2-2) until the con-
trol cable no longer sags (is slightly tensi-
oned). Hold the cable while tightening so that
it does not twist.
3. Tighten the lock nut(
2-1) firmly.
Maintenance and care
Danger - risk of injury!
Beforeperforminganymaintenanceorservice,
always switch off the engine and disconnect the
spark plug connector.
Theenginemaycoastdown.Afterswitchingoff,
makesurethattheengineisatastandstill.
Cleanthemachineaftereveryuse.Beespecially
suretoremoveresidualde-icingsalt.
Do not hose down the unit with water!
Waterpenetrationmaycausemalfunctions(ignition
system,carburettor).
Replace the silencer if defective.
Followthemaintenanceschedule.
Followtheinstructionsintheenginemanual.
Maintenance schedule
Before each use
Check the oil level (see engine manual).
Check the shear pins.
Check machine for damage.
After the first 5 hours of operation
Change the engine oil (see engine ma-
nual).
Every three months
Check the tyre pressure.
Oil the ring of the snow discharge with
spray oil (
6).
Annually
Replace spark plug (see engine manual).
Lubricate auger.
Lubricating the auger
Using a grease gun, inject 2 to 3 shots of univer-
sal grease into the grease nipple (
31).

Содержание