Home
Главная
CLAVIA DMI AB
Синтезатор
CLAVIA NORD Electro 4 HP
Руководство по эксплуатации Страница: 10

CLAVIA DMI AB CLAVIA NORD Electro 4 HP [10/26] Adding effects

Storing a program

If you are happy with a change to a program that you have made, you

should probably store the program.

1 Press the Store button.

The program number in the LED starts ﬂashing.

2 Select a new location where you want to store the program.

Use the Up/Down buttons

and the program buttons to

navigate to a new program

location if you do not want to

overwrite the original program.

3 Press the Store button a

second time to conﬁrm

your choice.

The edited program has now

replaced the previous one in

the location you speciﬁed.

M To cancel the procedure,

press the Shift button

before you press Store the second time.

M With Memory Protect set to Off, a double tap on the Store button

will store a Program in its original location.

The Live buffer

The special Live buffers can be described as a “live program memory”.

If you activate the Live button, all changes to the panel settings you

make will be continuously saved in the active Live program (1-4). If you

switch the power off, or select another program, the settings are still

stored in the Live memory, so when you power up next time (or return

to the Live memory) all settings will be exactly as they were when you

left them.

If the Live memory is selected and you decide you wish to store the

settings permanently as a program you can do so using the stan-

dard methods (see above). You can also store programs into the Live

memory location, in which case the program settings will replace the

current Live memory settings.

Octave Shift

Press either of the Octave Shift but-

tons to shift the pitch up or down in

whole octaves within the instrument’s

note range.

Each instrument has a ﬁnite note range, read more about this on page

15. This means that upper keys may become silent if you transpose

upwards.

Adding effects

1 Select the program number 1.1 which

is a Grand Piano with a hint of reverb.

2 Turn on Effect 2 (the On LED should

be lit) and press repeatedly on the

Effect 2 selector.

The effect options are indicated with the

selector LEDs and changes in a cyclical,

clockwise fashion for each time the selec-

tor is pressed.

Some of the effects have three options that

indicate the depth of the effect. Flang1 is

the shallowest version, Flang 2 is a more

pronounced effect and when both the Flang 1 and Flang 2 LEDs are lit,

you have selected the most dramatic ﬂanger effect.

3 Turn the effect rate knob.

This changes the rate of the active effect.

4 Hold Shift and press repeatedly on the effect selector.

This allows you to reverse through the effect selections.

5 Turn off the effect.

If you now continue to press on the effect selector after the effect is

turned off, the effect setting will change even though the effect is not

active.

Activate an ampliﬁer emulation

1 Press the Speaker/Comp button to activate the Amp emulation.

The Speaker/Comp LED will be lit.

2 Press repeatedly on the selector to cycle through the various options.

The knob controls the drive for the three amps and the rotary simulator,

and the amount when the compressor is selected.

The Delay

1 Activate the delay/reverb.

2 Hold Shift and press the reverb selector

button. The Delay LED lights up.

3 Tap the desired tempo on the Tempo Tap

button.

4 You can also set the delay time by hold-

ing the Tempo Tap button and adjust the

tempo with the Up/Down buttons.

5 Adjust the number of repeats (Dly1, Dly2

etc.) by pressing the selector button repeatedly.

10 | Nord ElEctro 4 HP/SW USEr MaNUal oS v1.1x

CLAVIA DMI AB CLAVIA NORD Electro 4 HP [10/26] Adding effects

Содержание

Похожие устройства