Home
Главная
Scarlett
Пылесос с мешком
SC-VC80C90
Руководство по эксплуатации Страница: 4

Scarlett SC-VC80C90 [4/8] Gb instruction manual

IM020

www.scarlett.ru SC-VC80C90

GB INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

 Read this instruction manual carefully to prevent any unit

damage or injure when using.

 When using this appliance, basic precautions should always

be followed:

 Before the first use of the appliance check that the voltage

indicated on the rating label corresponds to the mains

voltage in your home.

 For home use only. Do not use for industrial purposes.

 The appliance is intended for use only in domestic aims.

 To prevent risk of electric shock and fire, do not immerse the

appliance in water or any other liquids. If it has happened DO

NOT TOUCH the appliance, unplug it immediately and check

in a service center.

 Do not handle the plug with wet hands. Never switch off the

appliance by pulling the cord.

 Do not let the cord hang over sharp edges or touch hot

surfaces.

 Always unplug the appliance from the power supply when not

in use and before servicing.

 In case of power cord is damaged, its replacement should be

done by the manufacture or service department or the other

high-skill person to avoid any danger.

 To avoid deforming of plastic components of the appliance or

fire accident, never leave the appliance exposed to direct sun

light or near any heater.

 The appliance is not intended for use for physically, sensory

or mental disabled person (including children) or for person

with lack of life experience or knowledge, if only they are

under supervision or have been instructed about the use of

the unit by responsible person.

 Children must be under control in order not to be allowed to

play with the appliance.

 To avoid damage of the flexible hose, do not fold or pull it

strongly.

 Do not put any object into air outlets. Do not use with outlet

blocked. Keep free of dust, hair and anything that may

reduce airflow.

 Be careful when cleaning on stairs.

 Before you start using the vacuum cleaner, please remove all

large or sharp objects from the floor in order to prevent

damage of the unit.

 CAUTION: To avoid voltage overload do not plug the unit

and other powerful electrical appliances to the power supply

at the same time.

 Never use the vacuum cleaner without filters.

 Do not use the appliance on wet surfaces. This unit does not

absorb water.

 If you have cleaned the carpet with liquid detergent, let the

carpet dry up completely before vacuuming it.

 Never use the appliance without dust bin. Replace the dust

bin without delay if it is damaged.

 Do not attempt to repair, adjust or replace parts in the

appliance. Repair the malfunctioning appliance in the nearest

service center.

 If the product has been exposed to temperatures below 0ºC

for some time it should be kept at room temperature for at

least 2 hours before turning it on.

 The manufacturer reserves the right to introduce minor

changes into the product design without prior notice, unless

such changes influence significantly the product safety,

performance, and functions.

 Manufacturing date is indicated on the unit and/or on packing

as well as in accompanying documents in the following

format XX.XXXX where first two figures XX is the month of

production, and following four figures XXXX is the year of

production.

PREPARATION

 The device is designed to clean the floor from dust and small

debris.

 Unpack the device and remove the sticker from the body.

 In order to connect the hose to the vacuum cleaner insert

hose base into sucking inlet and turn 90 degrees clockwise

until it stops, disconnect the hose, turn it in the opposite

direction.

 Pull out the retractable tube until the necessary length is

reached. For this purpose move the retractable tube length

adjuster and pull out the tube end.

 Insert the hose into the tube.

 Attach one of the nozzles to the tube:

 Floor brush is intended for cleaning bare floor and floor

coverings.

 «Crevice-аurniture» nozzle is for cleaning sofa, curtain or

dust on the decorative surfaces, corners and between

cushions. To clean furniture and decorative surfaces turn the

nozzle in the arrow shown direction.

INSTRUCTION FOR USE

 "Cyclone" system ensures maximum power during

cleaning.

 Before starting, unwind the cord to sufficient length and

insert the plug into the power supply. The yellow mark on

the cord shows optimal cord length. Do not unwind the

cord beyond the red mark.

 Press On/Off button to switch the unit on and press again

to stop it.

 You can adjust the air flow using the air flow regulator on

the flexible hose handle: decrease flow for cleaning

curtains, books, furniture, etc. Increase flow for cleaning

bare floor.

 To rewind the cord, press the rewind button and guide

the cord with hand to ensure that it does not whip causing

damage.

 WARNING!

 Be sure to clean the container after each cleaning.

 Never use the vacuum cleaner without installed filter and

with damaged or dirty filter. Otherwise, dust will fall into

the motor and cause damage to the vacuum cleaner.

 Don’t use the vacuum cleaner if the container is filled to

the mark “MAX”. When the container is filled, dirty air

clogs up the vacuum cleaner filter and the engine can

overheat and disable.

 Don’t use the vacuum cleaner for cleaning of material

debris such as cement, whitewash, plaster, metal

shavings and etc. These particles cause to the engine

damage.

 Don’t wash vacuum cleaner parts in a dishwasher or a

construction machine.

CARE AND CLEANING

 Switch off the appliance and pull the plug from the power

supply.

 Clean the appliance outside surface with soft cloth using mild

non-abrasive detergent.

 Vacuum cleaner or cord should never be immersed into

water or any liquids.

DUST COLLECTOR CLEANING

 Disconnect the vacuum cleaner from the mains.

 Detach the dust collector. For this purpose press the dust

collector lock button.

 Empty the dust collector.

CLEANING OF FILTERS

 Clean the filters at least once a year. In case if the vacuum

cleaner is used frequently, wash the filters after each 3 to 5

dust collector cleaning operations.

 Disconnect the vacuum cleaner from the mains.

 Remove the filter from the container.

 Wash all plastic parts and sponge of the filter with warm

running water, and then dry them thoroughly.

 Remove the rear grill and take out the outlet filter.

 Wash the filter with running water and dry it thoroughly.

 After cleaning insert the filter into place.

STORAGE

 Place the appliance vertically.

 Insert the tube into special holder on the body.

Scarlett SC-VC80C90 [4/8] Gb instruction manual

Содержание

Похожие устройства