Luxstahl MARCO Maxibrew-Twin [3/8] The marco qwikbrew 2 twin uses the continuous fill cycle as standard

1900064 REV.2 Page 3 of 8

Power

Time until first

brew

Time until

tank is full

Recovery rate

5.6kW

39 minutes

50 minutes

0.9 Litres/minute

6kW

36 minutes

47 minutes

1.0 Litres/minute

8.4kW

26 minutes

34 minutes

1.4 Litres/minute

OPERATION:

The Marco Qwikbrew 2 Twin uses the ‘Continuous fill cycle’ as standard.

Continuous Fill Mode (Standard):

 Water will be taken in until the machine is full. The heating begins when the quantity of

water is at a safe level above the elements and stops when the machine is full and up to

temperature.

 Once the water is up to temperature, the green ‘Ready to Brew’ lights illuminate. A

brew can be selected at this point.

 The ‘Continuous fill mode’ essentially keeps the machine full of water, regardless of

temperature. In this mode the machine will never run out of water, but misuse (e.g.

filling buckets for cleaning) can allow cold water to be served. Using hot water at a

faster rate than the machine can recover will result in a temperature drop in the

beverage.

Heat-fill mode (Optional):

 This mode of operation is available as an option, but a service agent is required to make

this change.

 Tea and coffee is at the optimum temperature when operating under the heat-fill mode.

 Water will be taken in until it is a safe level above the elements. At this point the water

stops and heating begins. Once this quantity of water is up to temperature, another small

quantity of cold water is taken in while the heating continues. This heat fill cycle

maintains the correct temperature in the tank.