Vitek VT-1266 [6/32] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1266 [6/32] English

Vitek VT-1266 [6/32] English
6
ENGLISH
temperature•and•raise•it•gradually•until•you•get•
the•desired•result).
•
Corduroy•and•other•fabrics•that•become•glossy•
quickly•should•be•ironed•strictly•in•one•direction•
(in•the•direction•of•the•pile)•with•slight•pressure.
•
To• avoid• appearance• of•glossy• spots• on• syn-
thetic•and•silk•fabrics,•iron•them•backside.
SETTING THE IRONING TEMPERATURE
•
Place•the•iron•on•its•base•(9).
•
Insert•the•power•plug•into•the•mains•socket.
•
Turn• the• knob• (11)• to• set• the• required• iron-
ing• temperature:• «•»,• «••»,• «•••»• or• «MAX»•
(depending• on• the• type• of• fabric),• the• pilot•
lamp•(8)•will•light•up.
•
Once• the• temperature• of• the• soleplate• (14)•
reaches•the•set•point,•the•pilot•lamp•(8)•will•go•
out•and•you•can•start•ironing.
Note:
•
If you are ironing at high temperature but you
need to switch to low temperature, wait until
the soleplate temperature decreases and the
pilot lamp(8) lights up, and only then you may
start ironing. While steam ironing it is neces-
sary to set the ironing temperature «•••» or
«MAX».
WATER SPRAY
•
You• can• dampen• the• fabric• by• pressing• the•
water•spray•button•(5)•several•times.
•
Make• sure• that• there• is• enough• water• in• the•
water•tank•(10).
DRY IRONING
•
Place•the•iron•on•its•base•(9).
•
Insert•the•power•plug•into•the•mains•socket.
•
Set• the• continuous• steam• supply• knob• (3)• to•
the•lower•position•(steam•supply•is•off).
•
Turn• the• knob• (11)• to• set• the• required• iron-
ing• temperature:• «•»,• «••»,• «•••»• or• «MAX»•
(depending•on•the•type•of•fabric),•the•pilot•lamp•
(8)•will•light•up.
•
Once• the• soleplate• (14)• reaches•the• set• tem-
perature,•the•pilot•lamp•(8)•will•go•out•and•you•
can•start•ironing.
•
After• you• finish• ironing,• set• the• temperature•
control•knob•(11)•to•the•«OFF»•position.
•
Pull•the•power•plug•out•of•the•mains•socket•and•
let•the•iron•cool•down•completely.
STEAM IRONING
While• steam• ironing• it• is• necessary• to• set• the•
ironing•temperature•«•••»•or• «MAX».• The•iron•is•
provided•with• an• anti-drip• valve• that• stops• water•
supply•if•the•soleplate•temperature•is•too•low,•this•
prevents• dripping• from• the• soleplate• (14)• open-
ings.•During•heating•and•cooling•of•the•iron•sole-
plate,• you• will• hear• characteristic• clicks• of• the•
anti-drip• valve• opening/closing,• which• indicates•
its•normal•operation.
•
Place•the•iron•on•its•base•(9).
•
Set• the• continuous• steam• supply• knob• (3)• to•
the•lower•position•–•steam•supply•is•off.
•
Insert•the•power•plug•into•the•mains•socket.
•
Make• sure• that• there• is• enough• water• in• the•
water•tank•(10).
•
Turn• the• knob• (11)• to• set• the• required• iron-
ing• temperature:• «•••»• or• «MAX»,• the• pilot•
lamp•(8)•will•light•up.
•
Once• the• temperature• of• the• soleplate• (14)•
reaches•the•set•point,•the•pilot•lamp•(8)•will•go•
out•and•you•can•start•ironing.
•
Turn•the•continuous•steam•supply•knob•(3)•to•
set•the•required•steam•generation•rate,•steam•
will• start• going• out• from• the• soleplate• (14)•
openings.
•
The• continuous• steam• supply• knob• (3)• has•
three•positions:•the•lower•position•–•the•steam•
supply•is•off,•the•middle•and•higher•position•-•
with•various•intensity•of•steam•generation.•For•
maximum• continuous• steam• supply• set• the•
knob•(3)•to•the•higher•position.
•
After• you• finish• ironing,• set• the• temperature•
control•knob•(11)•to•the•position•«OFF»,•and•the•
continuous•steam•supply•knob•(3)•to•the•lower•
position•–•steam•supply•is•off.
•
Pull•the•power•plug•out•of•the•mains•socket•and•
let•the•iron•cool•down•completely.
ATTENTION!
If steam is not supplied constantly during the
operation, check whether the temperature control
knob (11) and the continuous steam supply knob
(3) are set properly and whether there is water in
the water tank (10).
BURST OF STEAM
The• burst• of• steam• function• is• useful• for• ironing•
folds• and• can• only• be• used• at• high• ironing• tem-
peratures•(when•the•iron•temperature•control•knob•
(11)•is•set•to•the•position•«•••»•or•«MAX»).
•
When• pressing• the• burst• of• steam• button• (4)•
steam• will• go• out• of• the• iron• soleplate• more•
intensively.
Note: To avoid water leakage from steam open-
ings, press the burst of steam button (4) with
a 4-5 sec. interval.
IM VT-1266.indd 6 20.05.2016 9:09:15

Содержание

Похожие устройства

Скачать