Pilotage Arrow 25 RC15829 [8/28] Maintenance

WHEN YOU FINISH

1. Power o the ESC.

2. Disconnect the battery.

3. Power o the transmitter.

4. Remove the battery from the boat.

TIP!

Always store the boat open (without the hatch and inner liner sealed) or moisture may allow mold and mildew

to grow in the boat.

MAINTENANCE

Always replace the exshaft when it is damaged or shows visible wear or injury and property damage may result.

Lubricating the exshaft is vital to the life of the drivetrain. The lubricant also acts as a water seal, keeping water

from entering the hull through the stung box.

Lubricate the exshaft, propeller shaft and all moving parts after every 2–3 hours of operation. Always replace

any parts that show visible wear or damage.

1. Loosen the coupling between the motor and the

exshaft.

2. Loosen the setscrew from the exshaft and remove

the exshaft from the back of the boat.

TIP!

Use paper or cloth to touch the exshaft.

3. Remove the drive shaft by sliding it out of the

stung box. Wipe lubricant and material from the

exshaft. Lubricate the full length of the exshaft

assembly up to the drive dog using marine grease.

4. Apply threadlock to the coupling setscrew.

Threadlock will help prevent the exshaft from

loosening during use.

5. Carefully reinstall the drive shaft, ensuring that

there is a 1–2mm gap between the prop strut and

the drive dog to allow for exshaft shrinkage under

load.