Bosch UniversalGrassCut 18 Li [29/492] Troubleshooting

Bosch UniversalGrassCut 18 Li [29/492] Troubleshooting
English | 29
To switch off, release the On/Off switch (8).
Lawn Trimming/Edge Cutting (see figures I − K)
Lawn trimming (see figure I)
Press the foot pedal (4) and set the 48° angle for lawn trim-
ming.
Move the trimmer left and right, keeping it well away from
the body. Cut higher grass in steps.
Edge cutting (see figure J)
Press the foot pedal (4) and set the 36° angle for edge cut-
ting. Rotate the handle by 180° and then turn the trimmer
clockwise to the desired working position.
Guide the trimmer along the edge of the lawn. By using the
wheel, you avoid contact with solid surfaces or walls to pre-
vent rapid wear of the cutting line.
Cutting around trees and bushes (see figure K)
Press the foot pedal (4) and set the 24° angle for cutting
around trees and bushes.
Carefully cut around trees and bushes so that they do not
come into contact with the cutting line. Plants can die if you
damage the bark.
Dismounting the spool, winding up the cutting
line and mounting the spool (see figures N to L)
u Remove the battery before replacing the spool.
Press both latches of the spool cover together and remove
the spool cover (13). Afterwards, remove the empty spool
(14).
Cut off approx. 6 m line from the refill roll. Thread the end of
the line into the spool's hole for line wind-up (15). Thread/
work the line under the hook (17). Then, thread/work the
line up and through the slot (18) in the spool. Afterwards,
wind up the thread on the spool uniformly and tightly.
Slide the other end of the cutting line through the hole for
line guiding (19) in the trimmer head and mount the spool
back into the trimmer head. Affix the spool by mounting the
spool cover (13).
The spool cover (13) can only be mounted in one position.
Line Feeding
IntelliFEED
The trimmer is equipped with the IntelliFEED system, which
automatically rolls off the line to retain the cutting diameter.
Troubleshooting
d.c.
Lawn Edge Trimmer/Grass Trimmer
ProblemPossible CauseCorrective Action
Motor refuses to startBattery dischargedRecharge battery.
Battery too hot/coldAllow to cool/warm.
Garden tool functions
intermittently
On/Off switch defectiveContact Bosch customer service agent.
Internal wiring of garden tool defectiveContact Bosch customer service agent.
Garden product la-
bours
Grass too highCut in stages.
Garden tool does not
cut
Cutting line too short/broken offManually feed cutting line.
Spool emptyReplace line spool.
Cutting line can no
longer be fed
Line inside the spool entangledInspect the spool, rewind if necessary.
Spool emptyRefill line spool.
Incorrect windingRewind the spool.
Excessive lineShorten line to correct length.
Cutting line entangledProblems with the line feed systemContact Bosch customer service agent
Cutting line retracts
into spool
Cutting line too short/broken off
Remove spool – rethread line (see figures LN).
Line breaks frequentlyLine inside the spool entangled
Remove spool – rewind line (see figures LN).
Trimmer used incorrectlyOnly trim with the tip of the line, avoid stones,
walls and other hard objects. Feed the line regu-
larly to maintain full cutting diameter.
Trimmer vibrates ab-
normally
Clamping ring or spool cover not mounted to
spool
Mount clamping ring or spool cover onto spool.
Bosch Power ToolsF 016 L81 803 | (28.02.2019)

Содержание

Похожие устройства

Скачать