Bosch ART37 (0.600.878.M20) [8/18] Intended use
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Bosch ART37 (0.600.878.M20) [8/18] Intended use

Bosch ART37 (0.600.878.M20) [8/18] Intended use
F 016 L70 848 | (9.1.12) Bosch Power Tools
8 | English
Symbols
The following symbols are important for reading and
understanding the operating instructions. Please take
note of the symbols and their meaning. The correct in-
terpretation of the symbols will help you to use the
garden product in a better and safer manner.
Intended Use
The machine is intended for the cutting of grass and
weeds under bushes, as well as on slopes and edges
that can not be reached with the lawn mower.
Intended use is related to operation within 0 °C and
40 °C ambient temperature.
Technical Data
Noise/Vibration Information
Measured sound values determined according to
EN 60335.
Typically the A-weighted noise levels of the product
are: Sound pressure level 83 dB(A); sound power level
103 dB(A). Uncertainty K =2.5 dB.
Vibration total values a
h
(triax vector sum) and uncer-
tainty K determined according to EN 60335:
a
h
=4.8 m/s
2
, K=1.5 m/s
2
.
Mounting and Operation
f Do not connect the machine to the mains socket
before it is completely assembled.
f The cutting line continues to rotate for a few sec-
onds after the trimmer is switched off. Allow the
motor/cutting line to stop rotating before switch-
ing “on” again.
f Do not rapidly switch off and on.
f Do not hand bump the line feed as it could be hot.
f Remove any grass from spool cover when chang-
ing line or spool.
f It is recommended to use a Bosch approved line.
Cutting performance will vary with different line.
f Use the original spring when replacing spool.
Symbol Meaning
Wear protective gloves
Do not use flowing water to clean
the machine
Reaction direction
Movement direction
Switching On
Switching Off
Prohibited action
Accessories/Spare Parts
Line trimmer ART 37
Article number
0 600 878 M..
Rated power
W 1000
No-load speed
min
-1
9000
Cutting line feed
Bump feed
Adjustable handle
z
Cutting line diameter
mm 2.0
Cutting diameter
cm 37
Cutting spool capacity
m7
Weight according to
EPTA-Procedure
01/2003
kg 4.6
Protection class
/II
Serial number see type plate on the gar-
den product
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate
of your garden product. The trade names of the indi-
vidual garden products may vary.
Action Figure
Delivery Scope 1
Connecting the Shaft 2
Mounting the Auxiliary Handle 3
Mountfing the Cutting Guard 4
Attaching the Shoulder Strap 5
Connecting the Extension Lead 6
Starting 7
Stopping 7
Working Advice 8
Feeding the Line 9
Replacing the Line Spool 10
Winding Line on Spool 11
Fitting Spool into Spool Holder 12
Maintenance, Cleaning and Storage 13
–14
Selecting accessories 15
OBJ_BUCH-1565-002.book Page 8 Monday, January 9, 2012 2:51 PM

Содержание

Похожие устройства

Скачать