Texas Efterh?ngt Rotorklipper Руководство по эксплуатации онлайн [6/22] 770494

then being run over by the mower. Accidents are most likely to occur with machines that are loaned

or rented to someone who has not read the owner's manual and is not familiar with a rotary mower.

Check the tractor master shield over the PTO shaft. Make sure it is in good condition and fastened

securely to the tractor. Purchase a new shield if old shield is damaged or missing.

STARTING AND STOPPING SAFETY

Mower operating power is supplied from tractor PTO. Refer to your tractor manual for PTO

engagement and disengagement instructions. Always operate the tractor PTO in the 540 rpm speed

selection. DO NOT OVER SPEED! Know how to stop tractor and mower quickly in case of an

emergency.

When engaging PTO, the engine RPM should always be low. Once engaged and ready to start

cutting, raise PTO speed to approx. 540 RPM and maintain throughout cutting operation.

Always stop the tractor, set brake, shut off the tractor engine, remove the ignition key, lower

implement to the ground and allow cutter blades to come to a complete stop before dismounting

tractor. Never leave equipment unattended with tractor running or with implement in raised

position.

STORAGE SAFETY

Following operation, or when unhooking, stop the tractor, set the brakes, desengage the PTO, shut

off the engine and remove the ignition keys.

Store the unit in an area away from human activity.

Do not park equipment where it will be exposed to livestock for long periods of time.Equipment

damage and livestock injury could result.

Do not permit children to play on or around the stored unit.

Make sure all parked machines are on a hard, level surface and engage all safety devices.

If blocking is used, make sure it is solid and secure before leaving area.

MAINTENANCE SAFETY

Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle in a closed

building. The exhaust fumes may cause asphyxiation.

Before working on this machine, drive to a level area, disengage the PTO, lower implement (or if

working underneath, raise and block securely), shut off the engine, set the brakes, and remove the

ignition keys.

Be certain all moving parts on attachments have come to a complete stop before attempting to

perform maintenance.

Never work under equipment unless it is blocked securely. Never depend on hydraulic system to

keep implement in raised position.

Keep all persons away from operator control area while performing adjustments, service, or

maintenance.

Always use personal protection devices such as eye, hand and hearing protectors, when performing

any service or maintenance.

Frequently check mower blades. They should be sharp, free of nicks and cracks and securely

fastened.