Texas Efterh?ngt Rotorklipper Руководство по эксплуатации онлайн [7/22] 770494

Periodically tighten all bolts, nuts and screws and check that all cotter pins are properly installed to

ensure unit is in a safe condition.

When completing a maintenance or service function, make sure all safety shields and devices are

installed before placing unit in service.

After servicing, be sure all tools, parts and service equipment are removed.

Check to ensure all safety signs are installed and in good condition. (See safety sign section for

location drawing.)

Do not allow grease or oil to build up on any deck or platform.

Where replacement parts are necessary for periodic maintenance and servicing, genuine factory

replacement parts must be used to restore your equipment to original specifications. The

manufacturer will not claim responsibility for use of unapproved parts and/or accessories and other

damages as a result of their use.

If equipment has been altered in any way from original design, the manufacturer does not accept any

liability for injury or warranty.

A fire extinguisher and first aid kit should be kept readily accessible while performing maintenance on

this equipment.

TRANSPORT SAFETY

Comply with state and local laws govering highway safety and movement of farm machinery on

public roads.

The use of flashing amber lights is acceptable in most localities. However, some localities prohibit

their use. Local laws should be checked for all highway lighting and marking requirements.

When driving the tractor and equipment on the road or highway under 20 mph at night or during the

day, use flashing amber warning lights and a slow moving vehicle (SMV) identification emblem.

Always be sure the implement is in the proper raised position for transport.

Reduce speed when transporting mounted implements to avoid bouncing and momentary loss of

steering control.

Plan your route to avoid heavy traffic.

Do not drink and drive!

Watch for traffic when operating near or crossing roadways.

Use extreme care and maintain minimum ground speed when transporting on hillside, over rough

ground and when operating close to ditches or fences. Be careful when turning sharp corners. Turn

curves or go up or down hills only at a low speed and at a gradual steering angle. Make certain that

at least 20% of the tractor's weight is on the front wheels to maintain safe steerage. Slow down on

rough or uneven surfaces, and loose gravel.

Never allow riders on either tractor or mower.

Be a safe and courteous driver.

Always yield to oncoming traffic in all

situations like narrow bridges and

intersections.

 CARRYING METHOD

 SAFETY SIGN LOCATIONS