Beurer LR200 [18/82] Filter change

6.5 Filter change

The three-layered ﬁlter should be replaced with a new one after 4320 operating hours. After 4320 operating

hours, a blue „Filter reset“ LED ﬂashes above the on/o button. To change the ﬁlter, proceed as follows:

Press the ON/OFF button to switch o the air

cleaner, and unplug it from the socket.

2. Remove the housing cover as shown (magnetic

fastening). First detach the magnetic fastening

at the top, and then at the bottom.

Pull out the pre-ﬁlter. Now, to pull out the combi

ﬁlter, pull carefully on the side tabs.

Insert a new combi ﬁlter. To insert the combi ﬁlter

correctly, align it with the tabs as shown. Position

the pre-ﬁlter above it.

5. Re-insert the housing cover as shown until you

see and hear it click into place (magnetic fas-

tening). First attach the magnetic fastening at the

bottom, and then at the top.

Insert the mains plug into the socket. Ensure that

the cable does not pose a trip hazard. Press and

hold the on/o button ( ) for ﬁve seconds. The

operating hours counter now resets to 0.