Melitta Caffeo Solo & Milk [21/278] Before using for the fi rst time

Melitta Caffeo Solo & Milk [21/278] Before using for the fi rst time
Operating Instructions: Melitta
®
Solo
®
& Milk
|
1829-0618 | 2018-08
21
Before using for the rst time
GB
Before using for the rst time
General information
Only use pure water without
carbonation.
Use the supplied test strip to determine
the hardness of the water used and set
the water hardness ("Water hardness
and lter", page 23).
If you wish to use a water lter, do not
insert it until after the initial startup.
Information for using for the rst
time
The appliance must be vented before it
is used for the rst time. The appliance
may only be powered on with a completely
lled water tank.
Place a vessel under the steam pipe 12.
Press the
button to switch on the
appliance.
illuminates on the display.
Turn the valve switch 11 clockwise
until it stops.
ashes on the display.
Water will ow into the vessel.
When
is illuminated on the display,
turn the valve switch 11 anticlockwise
until it stops.
The device is ready for operation.
After initial startup, insert the Melitta
®
PRO AQUA lter cartridge, if necessary
(see page 24).
Starting up the appliance
Commissioning
WARNING
Danger of re and electric shock
due to incorrect supply voltage,
incorrect or damaged connections
and power cable!
Ensure that the supply voltage
corresponds to the supply voltage
speci ed on the identi cation label of
the appliance. The identi cation label is
located on the right side of the appliance
behind the cover (Image A, 13).
Make sure that the power socket meets
the applicable standards for electrical
safety. If in doubt, contact a quali ed
electrician.
Never use damaged power cables
(damaged insulation, bare wires).
Place the appliance on a stable, dry and
level surface with suf cient clearance
(at least 10 cm) to the sides.
Plug the power cable into a suitable
power socket.
Remove the lid from the
bean container 8.
Fill the bean container with suitable
coffee beans.
Put the lid back on.
Lift up the lid of the water tank 7 and
pull the water tank up and out of the
appliance.
Fill the water tank with fresh tap water
only up to the max. mark.
Insert the water tank into the appliance.
Place a vessel under outlet 2.
Press the on/off
button to turn the
appliance on or off. The appliance may
perform an automatic rinse.

Содержание

Похожие устройства

Скачать