Melitta Caffeo Solo & Milk [30/278] Milk 1829 0618 2018 08

Melitta Caffeo Solo & Milk [30/278] Milk 1829 0618 2018 08
Operating Instructions: Melitta
®
Solo
®
& Milk
|
1829-0618 | 2018-08
30
Transport, Storage and Disposal
GB
Troubleshooting
Malfunction Cause Measure
Coffee only ows drop-
by-drop.
Grinding neness is too ne.
Adjust the grinding neness more
coarse.
Clean the brewing unit.
Perform a descaling or cleaning
programme if necessary.
Coffee does not ow.
Water tank not lled or
incorrectly inserted.
Fill the water tank and make sure it is
properly inserted.
The brewing unit is clogged. Clean the brewing unit.
The grinder is not
grinding.
The beans are not falling into
the grinder.
Tap lightly on the bean container.
Foreign objects in the grinder. Call the hotline.
Loud grinder noise. Foreign objects in the grinder. Call the hotline.
Bean symbols
are
ashing although the
bean container is full.
Insuf cient quantity of ground
beans in the brewing chamber.
Press the
button or button.
Appliance indicates
"no water" even though
the water tank is lled.
illuminates on the
display.
The oat is blocked.
Check the condition of the oat in the
water tank, remove the water and
carefully shake the tank.
The
symbol is
illuminated without a
reason.
There is air in the lines inside
the appliance.
Turn the valve switch 11 clockwise
until it stops until water ows out of the
appliance.
Clean the brewing unit if necessary.
The cleaning or
descaling process was
interrupted.
The power supply was
interrupted, e.g. due to a
power outage.
The appliance performs a rinsing
program autonomously. To do
so, follow the instructions on the
appliance.
Not enough milk froth
is formed during the
frothing process.
The nozzle of the steam pipe
is in the wrong position.
Adjust to the proper position.
The steam pipe nozzle is dirty. Clean the nozzle.
The brewing unit can
no longer be reinserted
after removal.
The brewing unit is not
properly locked.
Check whether the handle for locking
the brewing unit is correctly engaged.
The actuator is not in the
proper position.
Switch the appliance off and then on
again. Press the
and
buttons simultaneously for longer than
2 seconds. The actuator is put into
position. Then reinsert the brewing unit
and make sure it is correctly locked
into place.

Содержание

Похожие устройства

Скачать