Melitta Caffeo Solo & Milk [24/278] Pro aqua filter cartridge

Melitta Caffeo Solo & Milk [24/278] Pro aqua filter cartridge
Operating Instructions: Melitta
®
Solo
®
& Milk
|
1829-0618 | 2018-08
24
Water hardness and lter
GB
Melitta
®
PRO AQUA Filter cartridge
The Melitta
®
PRO AQUA lter cartridge
lters lime scale and other contaminants
from the water. The water lter should be
changed every 2 months, however, at the
latest when
appears on the display.
The water lter is available in specialised
shops.
Inserting the water lter
ashes during the entire change
procedure.
Put the water lter in a glass with
tap water for several minutes before
inserting it in the appliance.
Switch off the device.
Press and hold the
and buttons
for approx. 3 seconds, then release.
appears on the display.
Empty the drip tray and insert without
the coffee grounds container.
illuminates.
Pull the water tank 7 up and out of the
appliance.
Empty the water tank.
Screw the water lter onto the thread at
the bottom of the water tank.
Fill the water tank with fresh tap water
up to the max. mark.
Insert the water tank into the appliance.
illuminates.
Place the coffee grounds container
under the steam pipe 12.
Turn the valve switch 11 clockwise
until it stops.
ashes on the display.
Water will ow into the vessel.
When
is illuminated on the display,
turn the valve switch 11 anticlockwise
until it stops.
The device is ready for operation.
and
illuminate. The water hardness
is automatically set to hardness level 1.
Empty and insert the coffee grounds
container.
After inserting the water lter, the water
can be cloudy during the rst rinse
because excess activated carbon is
washed out of the lter. The water will then
be clear again.
Setting the water hardness
The appliance includes a test strip to
determine the water hardness.
Determine the hardness of the tap water
using the test strip.
Switch on the device.
Press the
and buttons
simultaneously for longer than
2 seconds.
ashes rapidly.
Press the button to show the
menu for setting the water hardness.
illuminates.
Set the determined water hardness by
pressing the
button. The selected
water hardness is shown by the bean
symbols
.
Water hardness °dH °e °fH
1:
0-10 0-13 0-18
2:
10-15 13-19 18-27
3:
15-20 19-25 27-36
4:
ashing
> 20 > 25 > 36
Press to con rm the selection.

Содержание

Похожие устройства

Скачать