Melitta Caffeo Solo & Milk [27/278] Other settings

Melitta Caffeo Solo & Milk [27/278] Other settings
Operating Instructions: Melitta
®
Solo
®
& Milk
|
1829-0618 | 2018-08
27
Other settings
GB
Descaling phase 2 ( ):
When
illuminates, proceed as follows:
Ensure that the coffee grounds container
is placed under the steam pipe with the
hose.
Turn the valve switch 11 clockwise until
it stops.
is ashing. Water will ow
intermittently into the coffee grounds
container (takes about 10 minutes).
is then illuminated.
Empty the drip tray and coffee grounds
container.
Reinsert the drip tray and put the coffee
grounds container back under the steam
pipe.
illuminates.
Remove the water tank and rinse
thoroughly with clear water.
Fill the water tank with tap water up to
the max. mark.
Insert the water tank.
Press the
button to continue with the
descaling programme. is ashing.
Water ows into the coffee grounds
container.
Descaling phase 3 (
):
When
illuminates, proceed as follows:
Turn the valve switch 11 anticlockwise
until it stops. Water ows inside the
appliance into the drip tray.
When
is illuminated, empty the drip
tray and the coffee grounds container
and reinsert them. When
is
illuminated, the descaling programme is
nished.
Insert the water lter if necessary
("Water hardness and lter", page 23).
Other settings
Energy-saving mode
After the last action, the appliance
switches automatically (depending on the
settings) to the energy-saving mode. The
appliance is factory-set at 5 minutes .
Switch on the device.
Press the
and buttons
simultaneously until
ashes.
Press the
button twice.
illuminates.
Press the
button until one of the four
times is set. The time is displayed by the
beans on display 9.
Display Time
5 minutes
(factory setting)
15 minutes
30 minutes
ashing
off
Press the button to con rm the
setting.

Содержание

Похожие устройства

Скачать