Nuova Simonelli Aurelia II 3 Gr S [73/214] Cleaning

Nuova Simonelli Aurelia II 3 Gr S [73/214] Cleaning
75
NLI
To switch the machine off press the main switch
and set the machine to the O energy position.
The machine must be set to “O” power (switch
off and disconnector open) before any cleaning
operations are performed.
Do not use solvents, chlorine-based prod-
ucts or abrasives.
Cleaning the work area: remove the worktop,
lifting it up from the front and sliding it out.
Remove the water collection dish underneath
and clean everything with hot water and cleans-
ers.
Cleaning the bottom: To clean all the chromi-
um-plated areas, use a soft, damp cloth.
8.1 SWITCHING OFF
THE MACHINE
8.2 CLEANING THE
OUTSIDE OF THE
MACHINE
Fig. 28
8. CLEANING
WARNING
8.3 CLEANING THE
STAINLESS
COFFEE-HOLDERS
The stainless coffee-holders are situated under
the delivery units, as shown in figure (29).
Fig. 29
NOTE: To clean proceed as follows:
Turn the screw placed in the centre of the
coffee-holder.
Slide the coffee-holder out and check that
its holes are not obstructed but clean.
If obstructed, clean as described (Paragraph
“CLEANING FILTERS AND FILTER-
HOLDERS”)
We recommend cleaning the coffee-holder
once a week.
CAUTION
RISK OF INTOXICATION
8.4 CLEANING THE
UNIT WITH THE
AID OF THE BLIND
FILTER
The machine is pre-set for cleaning the delivery
unit with a specific washing powder.
The machine will initiate washing cycle which
consists in the circulation of hot water followed
by regular breaks.
We recommend carrying out a washing cycle at
least once a day with special cleansers.
Once the filter-holder has been removed,
repeat delivery operations a few times to
eliminate any cleanser residues.
To carry out the washing procedure, proceed as
follows:
1) Substitute the filter with the delivery unit
blind filter.
2) Fill it with two spoonfuls of special cleanser
powder and insert it into the unit filter-holder.
3) Press one of the coffee keys and halt it after
10 seconds.
4) Repeat the procedure several times.
5) Remove the filter-holder and carry our a few
deliveries.
8.5 CLEANING
FILTERS AND
FILTER-HOLDERS
Place two spoonfuls of special cleanser in half
a litre of hot water and immerse filter and filter-
holder (without its handle) in it leaving them to
soak for at least half an hour. Then rinse abun-
dantly with running water.
It is not possible to clean the machine using
water jets or standing it in water.
WARNING

Содержание

Похожие устройства

Скачать