Roland Mobile BA [10/116] Mountingonamicstand

By using a mic stand, you can mount the MOBILE BA

at the optimal height for use as a monitor speaker or

simple PA device.

The mic stand holder (the hole diameter) is compatible

with both 3/8-inch and 5/8-inch types.

If you’re using the MOBILE BA with a 5/8 inch mic stand,

remove the mic stand adaptor from the bottom of the

unit.

NOTE

• When placing the MOBILE BA upside down, take care not to damage the buttons or knobs, and be

careful not to let it fall or tip over.

• If you’re not using a mic stand, be sure to attach the mic stand adaptor to prevent leakage of sound

(air).

Requirements when using a mic stand

As shown in the illustration, you must use a mic stand

that can be lower than 125 cm (49-1/4”; including the

MOBILE BA), and whose legs will be 63 cm (24-13/16”)

or more when opened to a maximum width.

NOTE

• Using a mic stand that does not meet the specications above may result in damage to equipment or

injury due to the stand tipping over.

• When using MOBILE BA with a mic stand, the mic stand must be carefully placed so it is level and sure

to remain stable.

• Cables connected to MOBILE BA should be given enough slack to prevent accidents that might result

from someone tripping over them.

• To prevent accidents due to falls, do not place any object on the MOBILE BA when it’s mounted on a

mic stand.

• After attaching the MOBILE BA to the mic stand, check to make sure that it is stable before you use it.

Mic stand adaptor

Mic stand holder

125 cm

(49-1/4”)

or less

63 cm (24-13/16”) or more

Mounting on a Mic Stand