RME HDSPe MADI FX [63/87] Midi page

User's Guide HDSPe MADI FX © RME

25.8.2 MIDI Page

The MIDI page has four independent settings for up to four MIDI remote controls, using CC

commands or the Mackie Control protocol.

Index

Select one of four settings pages and thus remote controls. Settings are remembered automati-

cally. To activate or deactivate any of the four remote controls check or uncheck ‘In Use’.

MIDI Remote Control

¾ MIDI In. Input where TotalMix receives

MIDI Remote data.

¾ MIDI Out. Output where TotalMix

sends MIDI Remote data.

¾ Disable MIDI in background.

Deactivates MIDI Remote Control as

soon as another application is in the

focus, or when TotalMix has been

minimized.

Mackie Control Options

¾ Enable Protocol Support. When

disabled TM FX will only react on the

Control Change commands of chapter

28.5.

¾ Map Stereo to 2 Mono Channels.

One fader controls one (mono)

channel. Should be disabled when

stereo channels are used.

¾ Submix Selection in Input/Playback

Row. Enables a selection of the

submix when in first row, without

having to change to the third row first.

However, when using both mono and

stereo channels, first and third row

usually do not match anymore, so the

selection often becomes unclear this

way.

¾ Enable full LCD support. Activates full Mackie Control LCD support with eight channel

names and eight volume/pan values.

¾ Send User defined Names. Channel names defined by the user will be sent to the remote

device via MIDI and – if supported – shown in its display.

¾ Send Level Messages. Activates the transmission of the level meter data. Peak Hold acti-

vates the peak hold function as set up for the TotalMix level meters in the preferences.

Note

: When MIDI Out is set to NONE then TotalMix FX can still be controlled by Mackie Control

MIDI commands, but the 8-channel block is not marked as remote target.