Home
Главная
Medeli
Электропиано
SP4000
Руководство по эксплуатации Страница: 24

Medeli SP4000 [24/32] Restore factory setting

You can refer to above procedures 3-6 to complete parameter settings of

controller 1/2/3. Press [MIDI EDIT] button to exit MIDI controller edit

mode, and the relevant indicator will go out.

Note:

1) The command value will be the DATA 1 of Bn if it is within the range

of 0-127 you set, then the value of DATA 2 can be set by pressing

[DATA] button.

2) If the number you set is 128, it can be the command Cn, then the

data value can be set by pressing the [DATA] button.

3) If the number you set is 129, it can be the command Dn, then the

data value can be set by pressing the [DATA] button.

4) If the number you set is 130, it can be the command En, the value

of DATA 2 can be set by pressing the [DATA] button and the DATA 1

will be automatically generated by DATA 2:

If Data2 = 0~126, then Data1=0;

If Data2 = 127, then Data1=127;

In addition:

If Data1=Data2=0, that means the pitch bend is in the lowest level;

If Data1=0，Data2=64, that means the pitch bend is in the middle

level;

If Data1=127，Data2=127, which means the pitch bend is in the

highest level.

Controller Output

1. Press and hold the [SHIFT] button, then press the [MIDI MODE]

button to enter the MIDI controller mode, the LED indicator of

[MIDI MODE] lights up.

2. Press the [CTRL 1] button, the LED indicator of [CTRL 1] will keep

flashing briefly, it represents the system is transmitting MIDI

information of controller 1. Then the relevant MIDI indicator lights

up when the transmit process is complete. If you press the

[CTRL 1] button again, the MIDI information will be repeatedly

transmitted.

3. In the same way, press the [CTRL 2] and [CTRL 3] button, the MIDI

information of corresponding controller will be transmitted from the

MIDI OUT.

4. In the MIDI controller mode, if you want to exit, press and hold the

[SHIFT] button, then press the [MIDI MODE] button.

In shutdown mode, press and hold [+/YES] and [-/NO] buttons together,

then turn the piano on, the system will be restored to factory setting, and

delete all recorded data, meanwhile the nixie tube displays “---”. After the

delete process is complete, the piano will be restored to the state of

power-on automatically. Please be careful.

MIDI Function

Restore Factory Setting

CMY

aw_SP4000_Manual_G06_150723.ai 24 2015/7/23 11:21:43aw_SP4000_Manual_G06_150723.ai 24 2015/7/23 11:21:43

Medeli SP4000 [24/32] Restore factory setting

Содержание

Похожие устройства