Saramonic UwMic9 TX9+TX9+RX9 [22/28] Specification

/ 20

② 

Manually setting the transmitter channel (Only available

on the UwMic10-TX10).

• Turn on the transmitter by long pressing the power button.

• Use the + or – button to display the channel setting menu

on the transmitter.

• Long press the SET button to select the menu.

• Use the + or – button to select the same channel as the

receiver and confirm it by short pressing the SET button.

Attach the accessories you need for the receiver and

transmitter. Refer to "Attaching Accessories" (page 4 and

page 10).

You are ready to record.

Specification

Receiver RX10

Channel number 96

Channel group A and B

Oscillator type PLL synthesizer

Audio output connector 3.5 mm mini jack

Antenna 1/4λ wire antenna

Audio output level –60 dBV

Headphone output level 30mW (16 Ω)

Receive frequencies 614 MHz - 696 MHz

Receive sensitivity -95 dBm

Signal to noise ratio 70 dB or more

Voice delay 12 ms

Reference deviation ±5 kHz (–60 dBV, 1 kHz input)

Frequency response 40 Hz to 18 kHz (+/-3dB)

Distortion 0.5% or less