![Saramonic UwMic9 TX9+TX9+RX9 Руководство по эксплуатации онлайн [8/28] 777759](/img/pdf.png)
Saramonic UwMic9 TX9+TX9+RX9 Руководство по эксплуатации онлайн [8/28] 777759
![Saramonic UwMic9 TX9+TX9+RX9 Руководство по эксплуатации онлайн [8/28] 777759](/views2/2009474/page8/bg8.png)
/ 6
Note: If the batteries are removed and reinserted while the
power key is set to Locked, the lock state of the Power key
will not be changed. You can turn on the receiver by long
pressing the power button.
3
8
Power of the Group. When you only use one group signal,
please turn off the other group to save battery. To save battery,
system default of the Group B is power off while the Group A is
power on.
When operating two transmitters simultaneously, please set
each transmitter to a different group to prevent interference or
noise.
4
9
Select channel. Details of operation, please refer to "Manually
setting the receiver channel" (page 18).
The system default of Group A is in RF frequence 614.560MHz,
Channel 01.
The system default of Group B is in RF frequence 656.510MHz,
Channel 01.
5
10
Set output volume. Set the volume of output audio within the
range 0 to 30. The setting is retained even after the power is
turned off. Default is 30.
Содержание
- Cautions 2
- Statement 2
- Contents 3
- General introduction 4
- Introduction 4
- Portable receiver uwmic10 rx10 4
- Product structure 4
- Attaching accessories 6
- Lcd display operation guide 7
- Group match with tx ettings 9
- Body pack transmitter uwmic10 tx10 10
- Introduction 10
- Product structure 10
- Serial number 10
- This transmitter is a compact transmitter that employs a crystal controlled pll synthesizer it is equipped with a muting function and a bmp type microphone input connector the rf power output can be switched among high middle and low 10
- Attaching accessories 12
- Lcd display operation guide 13
- Hand held microphone uwmic10 hu10 16
- Introduction 16
- Product structure 16
- Setup guide 17
- Operation guide 18
- Attach the accessories you need for the receiver and 22
- Long press the set button to select the menu 22
- Manually setting the transmitter channel only available on the uwmic10 tx10 22
- Receiver rx10 22
- Specification 22
- Transmitter refer to attaching accessories page 4 and page 10 22
- Turn on the transmitter by long pressing the power button 22
- Use the or button to display the channel setting menu on the transmitter 22
- Use the or button to select the same channel as the receiver and confirm it by short pressing the set button 22
- You are ready to record 22
- Transmitter tx10 and hu10 23
- Packing list 24
Похожие устройства
- Raylab Axio III 200 Basic Kit Руководство по эксплуатации
- Raylab Axio III RX-200 Руководство по эксплуатации
- MOTU micro express (USB) Руководство по эксплуатации
- EUROSOUND BBR-46A Руководство по эксплуатации
- Volta CS-6T Руководство по эксплуатации
- MOTU MIDI Express XT Руководство по эксплуатации
- Volta CUBE-20TB Руководство по эксплуатации
- Yerasov FETube Uber Higain UH-5 Руководство по эксплуатации
- Yerasov BULL 112 V Руководство по эксплуатации
- Yerasov 3000 Volt mini Руководство по эксплуатации
- RME M-16 DA Руководство по эксплуатации
- RME M-16 AD Руководство по эксплуатации
- RME HDSPe MADI Руководство по эксплуатации
- RME HDSPe AIO Руководство по эксплуатации
- RME HDSP 9632 Руководство по эксплуатации
- RCF C 5215-94 Руководство по эксплуатации
- Jedia JPA-1360B Руководство по эксплуатации
- IMAGE-LINE FL Studio 20 Producer Edition Руководство по эксплуатации
- DTS FOS 100 SOLO POWER FC Руководство по эксплуатации
- DTS FOS 100 SOLO POWER CT Руководство по эксплуатации