Infiniti FX35 (2010) [344/508] Automatic deactivation

Infiniti FX35 (2010) [344/508] Automatic deactivation
Setting LDP system to ON/OFF:
1. Push the SETTING
1
button and highlight
the “Driver Assistance” key on the display
using the INFINITI controller. Then push
the ENTER
2
button.
2. Highlight the “Dynamic Assistance set-
tings” key, and push the ENTER
2
but-
ton.
3. To set the LDP system to on or off, high-
light the “Lane Departure Prevention”
key, select ON or OFF and push the ENTER
2
button.
If both the LDP and DCA systems are set to OFF
on the display, when the LDP switch is pushed,
the LDP ON indicator light and the Distance
Control Assist (DCA) system switch indicator
light will blink for approximately 2 seconds. See
“DISTANCE CONTROL ASSIST (DCA) SYSTEM”
later in this section.
Automatic deactivation
Condition A :
The warning and assist functions of the LDP
system are not designed to work under the
following conditions:
When you operate the lane change signal
and change the traveling lanes in the direc-
tion of the signal. (The LDP system will be
deactivated for approximately 2 seconds af-
ter the lane change signal is turned off.)
When the vehicle speed lowers to less than
approximately 45 MPH (72 km/h).
After the above conditions have finished and
the necessary operating conditions are satis-
fied, the warning and assist functions will re-
sume.
Condition B :
The assist function of the LDP system is not
designed to work under the following condi-
tions (warning is still functional):
When the brake pedal is depressed.
When the steering wheel is turned as far as
necessary for the vehicle to change lanes.
When the accelerator pedal is depressed
while the brake control assist is provided.
SSD0886
5-24 Starting and driving
08/03/09—pattie

Содержание

Похожие устройства

Скачать