Infiniti FX35 (2010) [45/508] 07 30 09 patti

4. For child restraints that are equipped with

webbing mounted attachments, remove

any additional slack from the anchor at-

tachments. Press downward and rearward

firmly in the center of the child restraint

with your knee to compress the vehicle

seat cushion and seatback while tighten-

ing the webbing of the anchor attach-

ments.

5. If the child restraint is equipped with a

top tether strap, route the top tether strap

and secure the tether strap to the tether

anchor point. (See “TOP TETHER STRAP

CHILD RESTRAINT” earlier in this section.)

6. After attaching the child restraint, test it

before you place the child in it. Push it

from side to side while holding the seat

near the LATCH attachment path. The

child restraint should not move more than

1 inch (25 mm) from side to side. Try to tug

it forward and check to see if the LATCH

attachment holds the restraint in place. If

the restraint is not secure, tighten the

LATCH attachment as necessary, or put

the restraint in another seat and test it

again. You may need to try a different

child restraint. Not all child restraints fit

in all types of vehicles.

7. Check to make sure the child restraint is

properly secured prior to each use. If the

child restraint is loose, repeat steps 3

through 6.

Front-facing — step 4

SSS0647

Front-facing — step 6

SSS0638

Safety — Seats, seat belts and supplemental restraint system 1-27

췽 —

—

07/30/09—pattie

墍