Infiniti G37 Convertible (2009) [40/427] 04 03 09 tbrook

3. For child restraints that are equipped with

webbing mounted attachments, remove

any additional slack from the anchor at-

tachments. Press downward and rearward

firmly in the center of the child restraint

with your hand to compress the vehicle

seat cushion and seatback while tighten-

ing the webbing of the anchor attach-

ments.

After attaching the child restraint, test it

before you place the child in it. Push it from

side to side while holding the seat near the

LATCH attachment path. The child restraint

should not move more than 1 inch (25 mm)

from side to side. Try to tug it forward and

check to see if the LATCH attachment holds

the restraint in place. If the restraint is not

secure, tighten the LATCH attachment as

necessary, or put the restraint in another

seat and test it again. You may need to try

a different child restraint. Not all child

restraints fit in all types of vehicles.

5. Check to make sure the child restraint is

properly secured prior to each use. If the

child restraint is loose, repeat steps 3

through 4.

Rear-facing — step 3

SSS0639

Rear-facing — step 4

SSS0650

Safety — Seats, seat belts and supplemental restraint system 1-23

췽 —

—

04/03/09—tbrooks

墍