Infiniti G37 Convertible (2009) [44/427] 04 03 09 tbrook

7. After attaching the child restraint, test it

before you place the child in it. Push it

from side to side while holding the seat

near the seat belt path. The child restraint

should not move more than 1 inch (25 mm)

from side to side. Try to tug it forward and

check to see if the belt holds the restraint

in place. If the restraint is not secure,

tighten the belt as necessary, or put the

restraint in another seat and test it again.

You may need to try a different child

restraint. Not all child restraints fit in all

types of vehicles.

8. Check that the retractor is in the ALR

mode by trying to pull more seat belt out

of the retractor. If you cannot pull any

more belt webbing out of the retractor,

the retractor is in the ALR mode.

9. Check to make sure the child restraint is

properly secured prior to each use. If the

seat belt is not locked, repeat steps 3

through 8.

10. If the child restraint is installed in the

front passenger seat, push the ignition

switch to the ON position. The front

passenger air bag status light

should illuminate. If this light is not

illuminated, see “Front passenger air

bag and status light” later in this sec-

tion. Move the child restraint to another

seating position . Have the system

checked by an INFINITI dealer.

After the child restraint is removed and the seat

belt is fully retracted, the ALR mode (child

restraint mode) is canceled.

Front-facing — step 7

SSS0641

Forward-facing — step 10

SSS0676

Safety — Seats, seat belts and supplemental restraint system 1-27

췽 —

—

04/03/09—tbrooks

墍